Search GDR Data

Geothermal Technologies Program GETEM and LCOE Improvements Review (March 21, 2013)

This file was a report submitted to GTO by Mark Paster, a consultant to the GETEM project, to outline the improvements that were made between summer 2011 and spring 2013. The report focuses on six areas of model improvement: (1) Site Specific Cost Variability; (2) Consistency wi...

Paster, M. Idaho National Laboratory

Mar 21, 2013
1 Resources
0 Stars
Publicly accessible

EGS Collab Experiment 2: Earth Model Datasets

The EGS Collab Project performed a series of tests to increase the understanding the response of crystalline rock mass to stimulations and fluid circulation to efficiently implement enhanced geothermal systems (EGS) technologies. The EGS Collab team created two underground testbed...

Neupane, G. et al Idaho National Laboratory

May 29, 2022
6 Resources
0 Stars
Publicly accessible

Utah FORGE 3-2535: Building a 3D Resistivity Model for Simulation and Survey Design of EM Measurements

The included report outlines the creation of three 3D resistivity models that will be used to determine the sensitivity of EM measurements for the hypothetical stimulated reservoir at FORGE as well as for EM survey design. FORGE project 3-2535 is planning on using a casing source ...

Alumbaugh, D. et al Lawrence Berkeley National Laboratory

Dec 01, 2022
5 Resources
0 Stars
Curated

Microhole Tubing Bending Report

A downhole tubing bending study was made and is reported herein. It contains a report and 2 excel spreadsheets to calculate tubing bending and to estimate contact points of the tubing to the drilled hole wall (creating a new support point).

Ruan, C. Impact Technologies LLC

Jan 01, 2012
3 Resources
0 Stars
Publicly accessible

Deep Direct-Use Feasibility Study Development of 3-D Structural Surface Model for the Tuscarora Sandstone, Morgantown, WV

This dataset contains grid files for subsurface maps created in GES interpretation software and exported as Zmap formated grid files. Depth values in SSTVD (subsea true vertical depth). The methods used for analysis and a detailed discussion of the results are presented in a paper...

McCleery, R. et al West Virginia University

Dec 19, 2019
3 Resources
0 Stars
Publicly accessible

Coupling Subsurface and Above-Surface Models for Optimizing the Design of Borefields and District Heating and Cooling Systems

Accurate dynamic energy simulation is important for the design and sizing of district heating and cooling systems with geothermal heat exchange for seasonal energy storage. Current modeling approaches in building and district energy simulation tools typically consider heat conduct...

Hu, J. et al Lawrence Berkeley National Laboratory

Jan 31, 2022
10 Resources
0 Stars
Publicly accessible

Snake River Plain Play Fairway Analysis: Phase 2 Report and Phase 3 Proposal

This report presents the results of Phase 2 of the Snake River Plain Play Fairway Analysis project, and a summary of proposed work for Phase 3. Phase 2 focused on new data collection in specific areas of interest identified in Phase 1. These data include new magnetotelluric, seism...

Shervais, J. et al Utah State University

Sep 05, 2017
1 Resources
0 Stars
Publicly accessible

Simulating Complex Fracture Systems in Geothermal Reservoirs Using an Explicitly Coupled Hydro-Geomechanical Model

Low permeability geothermal reservoirs can be stimulated by hydraulic fracturing to create Enhanced (or Engineered) Geothermal Systems (EGS) with higher permeability and improved heat transfer to increase heat production. In this paper, we document our effort to develop a numerica...

Carrigan, C. et al Lawrence Livermore National Laboratory

Jan 01, 2011
2 Resources
0 Stars
Publicly accessible

REopt Lite Geothermal Heat Pump Design Requirements

This document describes the design requirements for the geothermal heat pump (GHP) module being added to the existing REopt Lite web tool. This document describes the purpose, users, and functional requirements to which the modified web tool shall conform. This document will be re...

Olis, D. National Renewable Energy Laboratory

Mar 08, 2021
6 Resources
0 Stars
Publicly accessible

EGS Collab Experiment 1: 3D Seismic Velocity Model and Updated Microseismic Catalog Using Transfer-Learning Aided Double-Difference Tomography

This package contains a 3D Seismic velocity model and an updated microseismic catalog associated with a proceedings paper (Chai et al., 2020) published in the 45th Workshop on Geothermal Reservoir Engineering. The 3D_seismic_velocity_model text file contains x (m), y(m), z(m), P-w...

Chai, C. et al Oak Ridge National Laboratory

Apr 20, 2020
7 Resources
0 Stars
Curated

Dixie Valley Engineered Geothermal System Exploration Methodology Project, Baseline Conceptual Model Report

The Engineered Geothermal System (EGS) Exploration Methodology Project is developing an exploration approach for EGS through the integration of geoscientific data. The overall project area is 2500km2 with the Calibration Area (Dixie Valley Geothermal Wellfield) being about 170km2....

Iovenitti, J. AltaRock Energy Inc

Jan 02, 2014
11 Resources
0 Stars
Publicly accessible

Utah FORGE 2-2439v2: Report on Predicting Far-Field Stresses Using Finite Element Modeling and Near-Wellbore Machine Learning for Well 16A(78)-32

This report presents the far-field stress predictions at two locations along the vertical section of Utah FORGE Well 16A (78)-32 using a physics-based thermo-poro-mechanical model. Three principal stresses in far-field were obtained by solving an inverse problem based on the near-...

Lu, G. et al University of Pittsburgh

Aug 30, 2024
2 Resources
0 Stars
Curated

Salton Sea Geothermal Development Nontechnical Barriers to Entry Analysis and Perspectives

The report included in this submission details the nontechnical barriers to entry for development of geothermal resources in the Salton Sea. The Salton Sea provides an economically viable opportunity for replacing the energy imported by California which makes up 25 percent of Cali...

Goodman, D. et al Pacific Northwest National Laboratory

Jun 28, 2022
1 Resources
0 Stars
Publicly accessible

Utah FORGE: North Milford Groundwater Geochemistry

This dataset contains groundwater geochemistry from several wells in North Milford Valley, Utah, in the region of the Utah FORGE project (Phase 2c). Readme file that discusses the data contained in the Excel spreadsheet. Data include GPS coordinates (UTM, Lat-Long), sampling tempe...

Simmons, S. and Kirby, S. Energy and Geoscience Institute at the University of Utah

Jun 20, 2019
3 Resources
0 Stars
Publicly accessible

Utah FORGE 3-2417: Meteorological Data During 2024 Stimulation

This preliminary data archive includes meteorological data recorded at the Utah FORGE facility over the period of time including the 16A/16B stimulation activities, largely March/April/May of 2024. This information may prove useful for understanding seismic and other instrumentati...

Ajo-Franklin, J. Rice University

May 09, 2024
5 Resources
0 Stars
Curated

Utah FORGE 3-2417: Meteorological Data During 2023 Completion/Circulation

This preliminary data archive includes meteorological data recorded at the Utah FORGE facility over the period of time including the completion/cementing of well 16B(78)-32 and the initial 2023 circulation test, largely occurring in June/July/August of 2023. This information may p...

Ajo-Franklin, J. Rice University

Jun 10, 2024
5 Resources
0 Stars
Curated

DEEPEN: Final 3D PFA Favorability Models and 2D Favorability Maps at Newberry Volcano

Part of the DEEPEN (DE-risking Exploration of geothermal Plays in magmatic ENvironments) project involved developing and testing a methodology for a 3D play fairway analysis (PFA) for multiple play types (conventional hydrothermal, superhot EGS, and supercritical). This was tested...

Taverna, N. et al National Renewable Energy Laboratory

Jan 24, 2024
14 Resources
0 Stars
Publicly accessible

Utah FORGE 2-2446: Report on Phase Field Modelling of Near-Wellbore Hydraulic Fracture Nucleation and Propagation

This is a report that describes the modelling of fracture nucleation and propagation in the near-wellbore region to understand the relationship between in situ stress and fracture patterns. A novel phase field formulation is described here, which represents fractures as a diffuse ...

Cusini, M. and Fei, F. Lawrence Livermore National Laboratory

Dec 31, 2023
1 Resources
0 Stars
Publicly accessible

Hawthorne Nevada Deep Direct-Use Feasibility Study 3D Geologic Model

The objective of this project is to use a multi-disciplinary, three-tiered approach to assess the geothermal resource and determine the feasibility of implementing a large-scale, direct-use facility for the Hawthorne Army Depot (HAD) and the various town and county facilities in H...

Lowry, T. Nevada Bureau of Mines and Geology

Mar 29, 2018
3 Resources
0 Stars
Publicly accessible

Community Geothermal: Borefield Design, Thermal Conductivity, and Subsurface Modeling Data Chicago, IL

This dataset encompasses the development of a geothermal energy system for the West Woodlawn neighborhood in Chicago, Illinois. This project is part of a broader initiative to design and deploy geothermal heating and cooling systems at a community scale. The dataset includes therm...

Baser, T. et al Saint Louis University

Dec 04, 2023
6 Resources
0 Stars
Curated

Final Report: Low Temperature Geothermal Play Fairway Analysis for the Appalachian Basin

This is a final report summarizing a two-year (2014-16) DOE funded Geothermal Play Fairway Analysis of the Low-Temperature resources of the Appalachian Basin of New York, Pennsylvania and West Virginia. Collaborators included Cornell University, Southern Methodist University, and ...

E. Jordan, T. Cornell University

Nov 18, 2015
12 Resources
0 Stars
Publicly accessible

Utah FORGE 3-2417: DAS Microseismic Event Catalog from the 16A/16B Circulation Test, 2023

This preliminary data archive includes the relocated microseismic event catalog, 1D velocity model, and methods report from DAS acquisition conducted during the Well 16A and 16B circulation test (July 19th and 20th, 2023) at Utah FORGE. The methods report describes all processing ...

Vera Rodriguez, I. et al Rice University

Jun 12, 2024
4 Resources
0 Stars
Curated

Hawthorne Nevada Deep Direct-Use Feasibility Study 3D Seismic

Lowry, T. et al Nevada Bureau of Mines and Geology

Mar 29, 2018
6 Resources
0 Stars
Publicly accessible

Material Properties for Brady Hot Springs Nevada USA from PoroTomo Project

The PoroTomo team has completed inverse modeling of the three data sets (seismology, geodesy, and hydrology) individually, as described previously. The estimated values of the material properties are registered on a three-dimensional grid with a spacing of 25 meters between nodes....

Feigl, K. and PoroTomo Team, . University of Wisconsin

Mar 06, 2019
10 Resources
0 Stars
Publicly accessible

Fallon FORGE: Seismic Reflection Profiles

Newly reprocessed Naval Air Station Fallon (1994) seismic lines: pre-stack depth migrations, with interpretations to support the Fallon FORGE (Phase 2B) 3D Geologic model. Data along seven profiles (>100 km of total profile length) through and adjacent to the Fallon site were re-...

Blankenship, D. et al Sandia National Laboratories

Feb 01, 2018
3 Resources
0 Stars
Publicly accessible

<< Previous 1 2 3 4 5 6 7 8 Next >>