Search GDR Data

Utah FORGE: 58-32 Injection and Packer Performance, April and May 2019

This is a PDF format summary report regarding the performance of a packer, which failed, and bridge plug used during the injection program in Utah FORGE deep Well 58-32, April and May, 2019.

McLennan, J. and Podgorney, R. Energy and Geoscience Institute at the University of Utah

Mar 22, 2020
1 Resources
0 Stars
Publicly accessible

Performance, Cost, and Financial Parameters of Geothermal District Heating Systems for Market Penetration Modeling under Various Scenarios

The U.S. Department of Energy Geothermal Vision (GeoVision) Study is currently looking at the potential to increase geothermal deployment in the U.S. and to understand the impact of this increased deployment. This paper reviews 31 performance, cost, and financial parameters as inp...

Beckers, K. and Young, K. National Renewable Energy Laboratory

Mar 23, 2017
1 Resources
1 Stars
Publicly accessible

Electronics Platform and Temperature Sensor System For Enhanced Geothermal Systems Capable of 300C

Final research performance report for an electronics platform and temperature sensor system for enhanced geothermal systems (EGS) capable of 300 degrees Celcius.

Vert, A. GE Global Research

Jan 01, 2012
1 Resources
0 Stars
Publicly accessible

Technology Development and Field Trials of EGS Drilling Systems at Chocolate Mountain

Polycrystalline diamond compact (PDC) bits are routinely used in the oil and gas industry for drilling medium to hard rock but have not been adopted for geothermal drilling, largely due to past reliability issues and higher purchase costs. The Sandia Geothermal Research Departmen...

Knudsen, S. et al Sandia National Laboratories

Jan 01, 2012
3 Resources
0 Stars
Publicly accessible

Operational Performance Requirements For Motor Power Sections Used in Geothermal Drilling Based Upon Minimum Specific Energy

Operational performance requirements are needed to support development of specifications for downhole motor power sections to be used for drilling hard rock during geothermal wellbore construction. Theoretical torque specifications are derived based upon a widely-accepted rock-re...

Raymond, D. Sandia National Laboratories

Sep 10, 2014
1 Resources
1 Stars
Publicly accessible

Advanced Sorbent Structure Recovery of REEs, Precious Metals and Other Valuable Metals from Geothermal Waters and Its Associated Technoeconomics

This work evaluates, develops and demonstrates flexible, scalable mineral extraction technology for geothermal brines based upon solid phase sorbent materials with a specific focus upon rare earth elements (REEs). The selected organic and inorganic sorbent materials demonstrated h...

Addleman, S. et al Pacific Northwest National Laboratory

May 25, 2017
3 Resources
0 Stars
Publicly accessible

Development of an Improved Cement for Geothermal Wells 2011 Progress Reports

This submission includes the University of Alaska Fairbanks Monthly Research Performance Progress Reports. The goal of this project is to develop an improved cement for geothermal wells.

Khataniar, S. Trabits Group, LLC

Jan 01, 2012
1 Resources
0 Stars
Publicly accessible

Development of an Improved Cement for Geothermal Wells 2012 Progress Reports

This submission includes the University of Alaska Fairbanks Monthly Research Performance Progress Reports. The goal of this project is to develop an improved cement for geothermal wells.

Khataniar, S. Trabits Group, LLC

Jan 01, 2013
1 Resources
0 Stars
Publicly accessible

Stability of Elastomers Subjected to Geothermal Well-Like Conditions

The aim of this study is to understand how commercially available elastomers perform under geothermal well-like conditions and make recommendations to the community based on these results. This poster highlights the mechanical performance of several elastomers (including EPDM, Vit...

Redline, E. et al Sandia National Laboratories

Aug 10, 2014
1 Resources
0 Stars
Publicly accessible

Recovery of Rare Earths, Precious Metals and Other Critical Materials from Geothermal Waters with Advanced Sorbent Structures

The work evaluates, develops and demonstrates flexible, scalable mineral extraction technology for geothermal brines based upon solid phase sorbent materials with a specific focus upon rare earth elements (REEs). The selected organic and inorganic sorbent materials demonstrated h...

Addleman, R. et al Pacific Northwest National Laboratory

Sep 30, 2015
2 Resources
0 Stars
Publicly accessible

Thermal Drawdown-Induced Flow Channeling in a Single Fracture in EGS

The evolution of flow pattern along a single fracture and its effects on heat production is a fundamental problem in the assessments of engineered geothermal systems (EGS). The channelized flow pattern associated with ubiquitous heterogeneity in fracture aperture distribution caus...

Guo, B. et al Lawrence Livermore National Laboratory

Nov 15, 2015
1 Resources
0 Stars
Publicly accessible

REE Adsorption Performance with Immobilized Caulobacter Biofilms

This submission includes data collected from experiments on the performance of rare earth adsorption by immobilized bacteria that accompany the FY18 Q2 and Q3 quarter reports. Relevant information from these reports is included in a resource below. The spreadsheet below includes d...

Jiao, Y. and Park, D. Lawrence Livermore National Laboratory

Apr 01, 2018
2 Resources
0 Stars
Publicly accessible

Thermal Drawdown Induced Flow Channeling in Fractured Geothermal Reservoirs: Rock Mechanics and Rock Engineering

We investigate the flow-channeling phenomenon caused by thermal drawdown in fractured geothermal reservoirs. A discrete fracture network-based, fully coupled thermal "hydrological" mechanical simulator is used to study the interactions between fluid flow, temperature change, and t...

Fu, P. et al Lawrence Livermore National Laboratory

Nov 15, 2015
1 Resources
0 Stars
Publicly accessible

EGS Collab Experiment 2: Continuous Active Source Seismic Monitoring (CASSM)

The dataset contains continuous active-source seismic monitoring (CASSM) data collected during EGS Collab Experiment 2, conducted from February to September 2022 at the Sanford Underground Research Facility in Lead, South Dakota. This experiment aimed to investigate enhanced geoth...

Hopp, C. et al Lawrence Berkeley National Laboratory

Jan 06, 2025
3 Resources
0 Stars
Publicly accessible

Foam Fracturing Study for Stimulation Development of Enhanced Geothermal Systems

This is a final technical report for the project: Foam Fracturing Study for Stimulation Development of Enhanced Geothermal Systems (EGS). The goal is to demonstrate the feasibility of foam fracturing in EGS applications. The project, led by Oak Ridge National Laboratory (ORNL), wa...

Wang, H. et al Oak Ridge National Laboratory

May 17, 2022
3 Resources
0 Stars
Publicly accessible

Lost Circulation Materials in Geothermal Drilling: Single Fracture Clogging Experments

The submitted dataset was generated by a series of laboratory fracture clogging (permeability reduction) experiments using commercially available materials used for lost circulation management during geothermal well drilling. The experiments were conducted using a permeability plu...

Lawrence Berkeley National Laboratory

Jan 06, 2025
15 Resources
0 Stars
In progress

Finite Volume Based Computer Program for Ground Source Heat Pump System Final Scientific Report

The goal of this project was to develop a detailed computer simulation tool for GSHP (ground source heat pump) heating and cooling systems. Two such tools were developed as part of this DOE (Department of Energy) grant; the first is a two-dimensional computer program called GEO2D ...

Menart, J. and Frederick, J. Wright State University

Jul 31, 2013
3 Resources
0 Stars
Publicly accessible

Global Value Chain and Manufacturing Analysis on Geothermal Power Plant Turbines

In this study, we have undertaken a robust analysis of the global supply chain and manufacturing costs for components of Organic Rankine Cycle (ORC) Turboexpander and steam turbines used in geothermal power plants. We collected a range of market data influencing manufacturing from...

Akar, S. et al National Renewable Energy Laboratory

Mar 30, 2018
6 Resources
1 Stars
Publicly accessible

Utah FORGE: Microseismic Monitoring Geophone Data from Well 78-32

This submission includes geophone data collected by Schlumberger from Utah FORGE Phase 2C seismic monitoring well 78-32 during stimulation testing of well 58-32. The data are hosted by the Center for High Performance Computing (CHPC) at the University of Utah, and a script for dow...

Pankow, K. University of Utah

Mar 18, 2020
5 Resources
0 Stars
Publicly accessible

Utah FORGE: Optimization of a Plug-and-Perf Stimulation (Fervo Energy)

Information around the plug-and-perf treatment design at Utah FORGE by Fervo Energy. Objective and Purpose: Develop a multistage hydraulic stimulation approach designed specifically to target the top three factors that control the technical and commercial viability of an EGS sys...

Norbeck, J. et al Fervo Energy

Feb 08, 2023
3 Resources
1 Stars
Publicly accessible

Tracerco High Temperature Tracer Thermal Stability Testing Report

This report presents thermal stability testing of fifteen Tracerco water tracers exposed to 250C for 48 hours. Tracer concentrations were compared using HPLC, with samples grouped based on retention time. Three tracers, HTP-001, HTP-002, and HTP-005, retained over 90% of their ori...

Leggett, S. Texas Tech University

Apr 11, 2025
1 Resources
0 Stars
Curated

COMSOL Models and Simulation Results for Closed-Loop Geothermal Systems with Thermal Enhancements

The Closed-Loop Geothermal Working Group and the National Renewable Energy Laboratory (NREL) have studied the performance of disc-shaped and linear thermal enhancements (conductive material introduced around a wellbore) in closed-loop geothermal systems. COMSOL models were develop...

Beckers, K. et al National Renewable Energy Laboratory

Dec 15, 2023
4 Resources
1 Stars
Publicly accessible

Testing LCM on a Large Scale for Geothermal Drilling Applications Using a Novel Experimental Setup

Rheology data obtained from flow loop tests, performed using different lost circulation materials (LCM) to study their effect on fluid rheology and wellbore hydraulics. The sealing performance of different LCM was tested using different fracture sizes. Five academic papers / repor...

Mohamed, A. et al University of Oklahoma

Apr 22, 2022
10 Resources
0 Stars
Publicly accessible

February 2014 Dixie Valley Binary Cycle Production Data Report

Formal Report: Dixie Valley Binary DOE Report February 2014. Includes summary of data, operations, outages, and curtailments in order to support the techno-economic feasibility of utilizing the available unused heat to generate additional electric power from a binary power plant f...

Brown, D. Terra-Gen Sierra Holdings, LLC

Mar 11, 2014
1 Resources
0 Stars
Publicly accessible

GeoVision: Harnessing the Heat Beneath Our Feet Analysis Inputs and Results

This submission includes input and results data from analysis done as part of the Geothermal Technology Office's Geothermal Vision Study (GeoVision). The submission includes data for both analysis of the electricity sector and the heating and cooling sector. For the electricity se...

Geothermal Technologies Office, U. National Renewable Energy Laboratory

Sep 30, 2019
16 Resources
3 Stars
Publicly accessible

1 2 3 4 5 Next >>