Search GDR Data
Showing results 101 - 125 of 761.
Show
results per page.
Order by:
Available Now:
Topic
Technologies
Demonstration Sites
Data Type
The accompanying raw data is from tests of the TI SM28VLT32 flash memory module at temps of 200C, 225C, and 29C. Each data file is 3 columns and tab-delimited with the first column being the data address, the second column being the first byte of the data, and the third column bei...
Conceptual model for the Newberry Caldera geothermal area. Model is centered around caldera and evaluates multiple geophysical datasets to derive a conceptual subsurface model.
Includes:
Conductor layer based on transient electromagnetic data from Fitterman et al., 1988 (figure...
This is a presentation on the Evolution of Permeability and Strength Recovery of Shear Fractures Under Hydrothermal Conditions by United States Geological Survey, presented by Tamara Jeppson. This video slide presentation, by the USGS, discusses the determination of how thermal, ...
This is a presentation on the Development and Testing of Tagged Proppant for Fracture Conductivity Enhancement and Reservoir Characterization in EGS by The University of Oklahoma, presented by Ahmad Ghassemi. This slide presentation video discusses the development and testing of n...
This is a presentation on Designing, Characterizing & Optimizing Proppant & Flow Monitoring Materials for a Utah FORGE Engineered Geothermal System by Oklahoma State University, presented by Dr. Mileva Radonjic. This video slide presentation discusses enhanced proppant coatings, z...
We have calculated a chlorite dissolution rate equation at far from equilibrium conditions by combining new data (20 experiments at high temperature) with previously published data Smith et al. 2013 and Lowson et al. 2007. All rate data (from the 127 experiments) are tabulated in...
This submission contains the presentation slides and recordings from EGS Collab Modeling and Simulation Working Group (MSWG) teleconferences number 129 through 130. These teleconferences served three objectives for the project: 1) share simulation results, 2) communicate field act...
The Engineered Geothermal System (EGS) Exploration Methodology Project is developing an exploration approach for EGS through the integration of geoscientific data. The overall project area is 2500km2 with the Calibration Area (Dixie Valley Geothermal Wellfield) being about 170km2....
This is a presentation on High-Temperature Testing of Proppants for EGS and Simulation of Electromagnetic Fracture Mapping Using Electrically-Conductive Proppants by Stevens Institute of Technology, presented by Dr. Cheng Chen. This video slide presentation describes laboratory te...
The Imperial Valley Dark Fiber Project acquired Distributed Acoustic Sensing (DAS) seismic data on a ~28 km segment of dark fiber between the cities of Calipatria and Imperial in the Imperial Valley, Southern California. Dark fiber refers to unused optical fiber cables in telecomm...
This dataset contains 1-second and hourly resolution water flow rate, pressure, temperature, and electrical conductivity data collected during Test 1 of the DEMO Fracture Thermal Energy Storage (FTES) project at the Sanford Underground Research Facility (SURF) between December 10,...
Included here are Distributed Acoustic Sensing (DAS) data collected by the horizontal DAS array at Brady's Hot Springs Geothermal Field. The system recorded this data during an M 2.3 explosion at the Nevada Test Site (NTS), which is located approximately 400km southeast of the fie...
Results of the analysis of HyMap's spectra against know hydrothermally altered minerals in the Brady-Desert Peak Geothermal Areas. The analysis was performed using ENVI's Target Detection process against USGS library spectra for Chalcedony, Kaolinite, Gypsum, Hematite and Epsomite...
This dataset contains results from a pump and probe experiment conducted on an intact Westerly Granite sample with a diameter of 1 inch and a height of 1 3/8 inches. The experiment was performed within an aluminum triaxial pressure vessel (TEMCO) to investigate the non-linear acou...
This dataset contains results from a pump and probe experiment conducted on a mated fracture Westerly Granite sample with a diameter of 1 inch and a height of 2 7/8 inches. The experiment was performed within an aluminum triaxial pressure vessel (TEMCO) to investigate the non-line...
Geoprobes were developed by the environmental industry to collect water, gas and soil samples from contaminated sites at shallow depths (10-40 meters), with a minimum of environmental disturbance. A modified Geoprobe was used to collect bottom hole temperatures, and attempt to col...
This dataset contains acoustic-emission (AE), ultrasonic-transmission, permeability, and hydromechanical measurements from triaxial laboratory experiments comparing differential stress-driven and pore-pressure-driven failure in saturated, thermally cracked Barre granite at 80 degr...
This dataset contains experimental data from fluid injection experiments conducted to investigate the influence of temperature on fracture seismicity. The experiments were performed on granite samples from Utah FORGE. The samples were prepared with a 30-degree inclined fracture an...
This dataset contains results from four fluid injection experiments at 24 C, 69 C, 111 C, and 140 C using a triaxial loading apparatus ("Temco"). Tests were conducted on a Utah FORGE granite sample with a 30 degree inclined fracture. Confining pressure was maintained at 10 MPa, wh...
This dataset provides an empirical three-dimensional P and S-wave velocity model covering a 30 x 30 km area and extending to 10 km depth around the Cape Modern EGS and Utah FORGE sites. It incorporates three-dimensional topography and a sediment/basement contact derived from geoph...
The McGinness Hills geothermal system lies in a ~8.5 km wide, north-northeast trending accommodation zone defined by east-dipping normal faults bounding the Toiyabe Range to the west and west-dipping normal faults bounding the Simpson Park Mountains to the east. Within this broad ...
MT is measured in the field by using induction coils to measure the time-varying magnetic source for frequencies between 1000-0.001~Hz, and electric dipoles to measure the Earth's electrical response. Because the magnetic source field is polarized, orthogonal directions of the f...
Files used to perform the Persistent Scatterer InSAR analysis with SARPROZ. The data is sourced from ESAs Sentinel-1 project and covers Brady Hot Springs and Desert Peak geothermal areas. The original titles are included for the Sentinel-1 data. The naming guide is included as a l...
This data archive includes the relocated microseismic event catalog and 3D velocity model from DAS acquisition conducted during the 16A stimulations that took place between April 3rd and April 7th, 2024. The catalog consists of multiple CSV files, each named after the associated s...
We deployed a dense seismic array to image the shallow structure in the injection area of the Brady Hot Springs geothermal site in Nevada. The array was composed of 238 5 Hz, three-component nodal instruments and 8,700 m of distributed acoustic sensing (DAS) fiber-optic cable inst...
Google Map