Search GDR Data

Hydrothermal mineral alterations in the Brady and Desert Peak geothermal fields

Results of the analysis of HyMap's spectra against know hydrothermally altered minerals in the Brady-Desert Peak Geothermal Areas. The analysis was performed using ENVI's Target Detection process against USGS library spectra for Chalcedony, Kaolinite, Gypsum, Hematite and Epsomite...

Moraga, J. Colorado School of Mines

Oct 01, 2021
4 Resources
0 Stars
Publicly accessible

West Flank Coso Downhole Temperature Data

Downhole temperature data for the three wells inside the West Flank FORGE footprint; 83-11, TCH 74-2 and TCH 48-11. TCH 74-2 and TCH 48-11 were both collected before 1990 and 83-11 was collected in 2009. The are compiled into one spreadsheet for ease of visualization. Plot of data...

Blankenship, D. Sandia National Laboratories

Mar 01, 2008
1 Resources
0 Stars
Publicly accessible

Strength Recovery of Cement Composites in Steam and Carbonate Environments

The data include compressive strength and Young's Modulus recoveries in steam and carbonate environments at 270 deg C for four chemically different cement composites after imposed controlled damaged.

Butcher, T. Brookhaven National Laboratory

Apr 28, 2016
1 Resources
0 Stars
Publicly accessible

Fallon FORGE: Fluid Geochemistry

Fluid geochemistry analysis for wells supporting the Fallon FORGE project. Samples were collected from geothermal wells using standard geothermal water sampling techniques, including filtration and acidification of the cation sample to pH < 2 prior to geochemical analysis. Analyse...

Blankenship, D. and Ayling, B. Sandia National Laboratories

Mar 13, 2018
1 Resources
0 Stars
Publicly accessible

Utah FORGE: Neubrex Circulation Test Results and Fiber Optics Technical Report April, 2024

This report examines the fiber optic measurements made on the 16B well after both wells were hydraulically stimulated and shortly thereafter a 9 hour cross well circulation test was run between the two slant wells, 16A and 16B. The report reviews distributed fiber optic signal pr...

Guzik, A. and Davidson, E. Neubrex Energy Services (US), LLC

Apr 27, 2024
1 Resources
0 Stars
In curation

Deep Direct-Use Feasibility Study Computed Tomography (CT)-scanned data Analysis for the Tuscarora Sandstone at the National Energy Technology Laboratory

The computed tomography (CT) facilities at the National Energy Technology Laboratory (NETL) Morgantown, West Virginia site were used to characterize core of the Tuscarora Sandstone from a vertical well in Preston County WV, the Preston-119 from a depth of 7,165 to 7,438 ft. The pr...

Brown, S. et al West Virginia University

Jan 10, 2020
11 Resources
0 Stars
Publicly accessible

Newberry EGS Seismic Velocity Model

We use ambient noise correlation (ANC) to create a detailed image of the subsurface seismic velocity at the Newberry EGS site down to 5 km. We collected continuous data for the 22 stations in the Newberry network, together with 12 additional stations from the nearby CC, UO and UW ...

Templeton, D. Lawrence Livermore National Laboratory

Oct 01, 2013
1 Resources
0 Stars
Publicly accessible

Brady's Geothermal Field Nodal Seismometer Active Source Data Sample

This data is in sac format and includes recordings of two active source events from 238 three-component nodal seismometers deployed at Bradys Hot Springs geothermal field as part of the PoroTomo project. The source was a viberoseis truck operating in P-wave vibrational mode and ge...

Feigl, K. University of Wisconsin

Mar 25, 2016
2 Resources
0 Stars
Publicly accessible

Community Geothermal: Soil Conductivity, Borehole Design, Energy Models, and Load Data for a Residential System Development Hinesburg, VT

This dataset contains materials from the Coalition for Community-Supported Affordable Geothermal Energy Systems (C2SAGES) project, which evaluated the techno-economic feasibility of a community geothermal system for a residential development in Hinesburg, VT. The dataset includes ...

Jogineedi, R. et al GTI Energy

Aug 30, 2024
56 Resources
0 Stars
Curated

Utah FORGE: Well 16A(78)-32 Drilling Data

This dataset includes survey data, drilling data, daily reports, summaries of daily operations, and rig photos from the drilling of Utah FORGE well 16A(78)-32, which is a highly deviated deep well. It was completed 60 days ahead of schedule. Rig move in began 10/22/2020 and dril...

McLennan, J. et al Energy and Geoscience Institute at the University of Utah

Jan 08, 2021
15 Resources
0 Stars
Curated

Utah FORGE: Well 16B(78)-32 Pressure-Temperature Logs March April 2024

This dataset consists of Baker Hughes Pressure-Temperature gauge readings on fiber optics in Utah FORGE Well 16B(78)-32. This gauge is at a measured depth of 7,056.67 feet. The true vertical depth can be determined from the well survey data, which is linked below. The data consis...

McLennan, J. and Hughes, B. Energy and Geoscience Institute at the University of Utah

Apr 20, 2024
2 Resources
0 Stars
Curated

Stability of Elastomers Subjected to Geothermal Well-Like Conditions

The aim of this study is to understand how commercially available elastomers perform under geothermal well-like conditions and make recommendations to the community based on these results. This poster highlights the mechanical performance of several elastomers (including EPDM, Vit...

Redline, E. et al Sandia National Laboratories

Aug 10, 2014
1 Resources
0 Stars
Publicly accessible

PoroTomo: Horizontal Distributed Acoustic Sensing (DAS) Measurements During an M 2.3 Explosion

Included here are Distributed Acoustic Sensing (DAS) data collected by the horizontal DAS array at Brady's Hot Springs Geothermal Field. The system recorded this data during an M 2.3 explosion at the Nevada Test Site (NTS), which is located approximately 400km southeast of the fie...

Kratt, C. et al Center for Transformative Environmental Monitoring Programs (CTEMPs)

Dec 18, 2018
5 Resources
0 Stars
Curated

Core-Shell REE Sorbent Extraction Data

Solution chemical analysis data for magnetic core shell sorbent materials. Deionized water and brine solutions were spiked with five rare earth elements and the solutions analyzed after approximately 5 minutes exposure to the sorbent particles.

Thallapally, P. Pacific Northwest National Laboratory

Apr 27, 2017
1 Resources
0 Stars
Publicly accessible

Utah FORGE: Soil Carbon Dioxide Data

These are data from soil CO2 flux surveys done in the Utah FORGE study area near Roosevelt Hot Springs. Concentration is in units of ppm and is the final concentration of CO2 in the chamber after the up-to-2-minute flux measurement. Flux is in units of grams of CO2 per m^2.

Rahilly, K. Energy and Geoscience Institute at the University of Utah

Mar 12, 2018
1 Resources
0 Stars
Publicly accessible

First Tracer Test After Circulation in Desert Peak 27-15

Following the successful stimulation of Desert Peak target EGS well 27-15, a circulation test was initiated by injecting a conservative tracer (1,5-nds) in combination with a reactive tracer (7-amino-1,3-naphthalene disulfonate). The closest production well 74-21 was monitored ove...

Rose, P. University of Utah

Nov 16, 2013
1 Resources
0 Stars
Publicly accessible

Alternative CAES Technology Using Depleted Unconventional Gas Wells and Subsurface Thermal Energy Storage (GeoCAES)

This project assessed the technical viability of a process called GeoCAES. The process stores electrical energy by injecting natural gas into shale gas formations using a compressor, storing it, and producing it through an expander to generate electricity. This data submission inc...

Johnston, H. and Young, D. National Renewable Energy Laboratory

May 23, 2019
8 Resources
0 Stars
Publicly accessible

Utah FORGE: Pump and Probe Test on an Intact Westerly Granite Sample

This dataset contains results from a pump and probe experiment conducted on an intact Westerly Granite sample with a diameter of 1 inch and a height of 1 3/8 inches. The experiment was performed within an aluminum triaxial pressure vessel (TEMCO) to investigate the non-linear acou...

Klinghammer, H. et al Pennsylvania State University

May 21, 2024
4 Resources
0 Stars
Curated

Community Geothermal: Final Thermal Conductivity Test Report and Data Logs Carbondale, CO

Provided here are a final thermal conductivity test report, a drilling log, and a heat rejection log from Carbondale, CO. Also attached is a report made before drilling, which contains predictions on the hydrogeologic conditions of the drill site. The forty-eight (48.9) hour in-si...

Ewbank, G. et al Clean Energy Economy for the Region (CLEER)

Oct 20, 2023
4 Resources
0 Stars
Curated

Thermal-Hydrological-Mechanical Modelling of Stockton University Reservoir Cooling System, Large Scale Grid

Mesh, properties, initial conditions, injection/withdrawal rates for modeling thermal, hydrological, and mechanical effects of fluid injection to and withdrawal from ground for Stockton University reservoir cooling system (aquifer storage cooling system), Galloway, New Jersey, on ...

Smith, J. et al Lawrence Berkeley National Laboratory

Feb 26, 2021
15 Resources
0 Stars
Publicly accessible

An HPC-Based Hydrothermal Finite Element Simulator for Modeling Underground Geothermal Behavior with Example Simulations on The Treasure Island and UC Berkeley Campus

This submission contains the source code of the Hydrothermal Finite Element Simulator used for the Treasure Island and UC Berkeley campus geothermal simulation. It contains a report that summarizes the development and validation of this Hydrothermal Finite Element Simulator, with ...

Chen, K. et al Lawrence Berkeley National Laboratory

Aug 01, 2021
5 Resources
0 Stars
Publicly accessible

Utah FORGE: Well 16A(78)-32: Summary of Drilling Activities

This is a 74 page detailed summary of the drilling activities of Utah FORGE 16A(78)-32, a highly deviated well completed on February 2nd, 2021, as part of the Utah FORGE project. This well was deviated at 65 degrees from vertical after reaching 6000 feet in depth had a total measu...

Winkler, D. et al Energy and Geoscience Institute at the University of Utah

Mar 20, 2021
1 Resources
0 Stars
Publicly accessible

Utah FORGE 3-2417: Well 16B(78)-32 Fiber-Optic Cable Installation Report

This is an installation report detailing placement of the integrated fiber-optic cable behind casing in Utah FORGE well 16B(78)-32. These activities occurred in July of 2023 immediately after the drilling of 16B. This report was prepared by the FOGMORE R&D project (Fiber Optic MOn...

Ajo-Franklin, J. et al Rice University

May 15, 2024
1 Resources
0 Stars
Curated

Utah FORGE 3-2535: Report on Borehole EM Data Collection and Imaging with the VEMP Field System

This report outlines electromagnetic field measurements that were made after stimulation at Utah FORGE in May of 2024. The measurements involved lowering an electrode to ~3500' in well 16A to energize the steel casing as part of the electric source, with the return electrode locat...

Alumbaugh, D. et al Lawrence Berkeley National Laboratory

Sep 05, 2024
1 Resources
0 Stars
Curated

Utah FORGE: Well 58-32 (MU-ESW1) FMI Log Fracture Results

A Schlumberger Fullbore Formation Micro-Imager (FMI) log was run from 7390 feet to 7527 feet depth in well 58-32, originally known as well MU-ESW1. Well 58-32 was completed in 2017 as part of Utah FORGE Phase 2. It reached a depth of 7536 feet and recorded a bottom hole temperatur...

BLOCHOWICZ, A. Energy and Geoscience Institute at the University of Utah

Mar 06, 2021
1 Resources
0 Stars
Publicly accessible

<< Previous 1 2 3 4 5 6 Next >>