Search GDR Data

Fallon FORGE: LiDAR Acquisition and Processing Report

The data is associated to the Fallon FORGE project and includes LiDAR from the Navy GPO. Also included are geologic maps from the USGS and Nevada Bureau of Mines and Geology for the Fallon, NV area.

Bucher, K. et al Sandia National Laboratories

May 23, 2016
2 Resources
0 Stars
Publicly accessible

Utah FORGE: Seismic DAS and Geophone Borehole Data Processing and 3D Imaging of Vp/Vs Ratio in the 2024 Stimulated Reservoir

This dataset includes a final report and a 3D velocity model derived from seismic DAS and geophone borehole data collected during the April 2024 stimulation of the reservoir at Utah FORGE. The report details the processing of over 50,000 P and S-wave travel times used in a tomogra...

Gritto, R. and Jarpe, S. EMR Solutions and Technology

Mar 17, 2025
2 Resources
0 Stars
Awaiting release

Rare Earth Element Content of Thermal Fluids from Surprise Valley, California

Rare earth element measurements for thermal fluids from Surprise Valley, California. Samples were collected in acid washed HDPE bottles and acidified with concentrated trace element clean (Fisher Scientific) nitric acid. Samples were pre-concentrated by a factor of approximately 1...

Fowler, A. and Zierenberg, R. University of California

Sep 23, 2015
1 Resources
0 Stars
Publicly accessible

Hydroshear Simulation Lab Test 2

This data file is for test 2. In this test a sample of granite with a pre-cut (man made fracture) is confined, heated and differential stress is applied. The max temperature in this this system development test is 95C. More test details can be found on the spreadsheets--note that ...

Bauer, S. Sandia National Laboratories

Aug 01, 2014
3 Resources
0 Stars
Publicly accessible

Washington Geothermal Play Fairway Analysis Heat, Permeability, and Fracture Model Data

This submission contains raster and vector data for the entire state of Washington, with specific emphasis on the three geothermal play fairway sites: Mount St. Helens seismic zone (MSHSZ), Wind River valley (WRV), and Mount Baker (MB). Data are provided for 3 major geothermal mo...

Steely, A. et al Washington Geological Survey

Dec 07, 2017
9 Resources
0 Stars
Publicly accessible

Utah FORGE 2-2439v2: Report on Predicting Far-Field Stresses Using Finite Element Modeling and Near-Wellbore Machine Learning for Well 16A(78)-32

This report presents the far-field stress predictions at two locations along the vertical section of Utah FORGE Well 16A (78)-32 using a physics-based thermo-poro-mechanical model. Three principal stresses in far-field were obtained by solving an inverse problem based on the near-...

Lu, G. et al University of Pittsburgh

Aug 30, 2024
2 Resources
0 Stars
Publicly accessible

Community Geothermal: Planning and Design of a Heating and Cooling System in Framingham, Massachusetts

These reports, plans, and drawings review the achievements of Home Energy Efficiency Team (HEET) and its partners to plan and design a network of interconnected ground-source heat pump systems, or geothermal network, in an area encompassing multiple environmental justice (EJ) neig...

Varela Gutierrez, I. et al Home Energy Efficiency Team (HEET)

Sep 01, 2024
6 Resources
0 Stars
Publicly accessible

Microearthquake Studies at the Salton Sea Geothermal Field

The objective of this project is to detect and locate microearthquakes to aid in the characterization of reservoir fracture networks. Accurate identification and mapping of the large numbers of microearthquakes induced in EGS is one technique that provides diagnostic information w...

Templeton, D. Lawrence Livermore National Laboratory

Oct 01, 2013
1 Resources
1 Stars
Publicly accessible

Walker Ranch 3D Seismic Images

Amplitude images (both vertical and depth slices) extracted from 3D seismic reflection survey over area of Walker Ranch area (adjacent to Raft River). Crossline spacing of 660 feet and inline of 165 feet using a Vibroseis source. Processing included depth migration. Micro-earthqua...

J., R. Lawrence Livermore National Laboratory

Mar 01, 2016
2 Resources
0 Stars
Publicly accessible

Three-Component Long Offset Surface Seismic Survey Data Used to Find Large Aperture Fractures in Geothermal Resources San Emidio Geothermal Resource Area

P and S-wave datasets and associated report studying the ability to use three-component long offset surface seismic surveys to find large aperture fractures in geothermal resources at the San Emidio geothermal resource area in Washoe County, Nevada.

Warren, I. U.S. Geothermal Inc.

Sep 15, 2010
4 Resources
0 Stars
Publicly accessible

Gravity Survey on the Glass Buttes Geothermal Exploration Project Lake County, Oregon

This report covers data acquisition, instrumentation and processing of a gravity survey performed on the Glass Buttes Geothermal Exploration Project, located in Lake County, Oregon for ORMAT Technologies Inc. The survey was conducted during 21 June 2010 to 26 June 2010. The surve...

Akerley, J. Ormat Nevada Inc

Oct 12, 2011
2 Resources
0 Stars
Publicly accessible

Utah FORGE 5-2419: Seismicity-Permeability Relationships Probed via Nonlinear Acoustic Imaging Workshop Presentation

This is a presentation on the Seismicity-Permeability Relationships Probed via Nonlinear Acoustic Imaging project by Pennsylvania State University, presented by Derek Elsworth. The project's objectives were to explore controls and acoustic signatures of aseismic through seismic e...

Elsworth, D. et al Pennsylvania State University

Sep 08, 2023
1 Resources
0 Stars
Publicly accessible

Utah FORGE 5-2428: Coupled Investigation of Fracture Permeability Impact on Reservoir Stress and Seismic Slip 2024 Annual Workshop Presentation

This is a presentation on the Coupled Investigation of Fracture Permeability Impact on Reservoir Stress and Seismic Slip Behavior by Lawrence Livermore National Laboratory, presented by Kayla Kroll. This presentation addresses testing and modelling related to the dependency of EG...

Kroll, K. et al Energy and Geoscience Institute at the University of Utah

Aug 27, 2024
1 Resources
0 Stars
Publicly accessible

Utah FORGE 2-2439v2: Reports on Stress Prediction and Modeling for Well 16B(78)-32 May 2025

These two reports from the University of Pittsburgh document related efforts under Utah FORGE Project 2-2439v2 to estimate in-situ stresses in well 16B(78)-32 using laboratory data, machine learning models, and physics-based simulations. One report focuses on developing and valida...

Lu, G. et al University of Pittsburgh

Jun 05, 2025
2 Resources
0 Stars
Curated

Utah FORGE: Report and Associated Data from Measuring and Modeling Deformation 2018 through 2024

The report provided here describes research activities between August 16th, 2018 and July 30th, 2024. The goals of the research activities are to conduct an Interferometric Synthetic Aperture Radar (InSAR) analysis and Ground Surface Deformation Modeling at the Utah FORGE site. In...

Feigl, K. and Batzli, S. University of Wisconsin Madison

Aug 16, 2018
6 Resources
0 Stars
Publicly accessible

Utah FORGE 3-2535: Report on Borehole EM Data Collection and Imaging with the VEMP Field System

This report outlines electromagnetic field measurements that were made after stimulation at Utah FORGE in May of 2024. The measurements involved lowering an electrode to ~3500' in well 16A to energize the steel casing as part of the electric source, with the return electrode locat...

Alumbaugh, D. et al Lawrence Berkeley National Laboratory

Sep 05, 2024
1 Resources
0 Stars
Publicly accessible

Hawthorne Nevada Deep Direct-Use Feasibility Study 3D Seismic

The objective of this project is to use a multi-disciplinary, three-tiered approach to assess the geothermal resource and determine the feasibility of implementing a large-scale, direct-use facility for the Hawthorne Army Depot (HAD) and the various town and county facilities in H...

Lowry, T. et al Nevada Bureau of Mines and Geology

Mar 29, 2018
6 Resources
0 Stars
Publicly accessible

3D Model of the San Emidio Geothermal Area

The San Emidio geothermal system is characterized by a left-step in a west-dipping normal fault system that bounds the western side of the Lake Range. The 3D geologic model consists of 5 geologic units and 55 faults. Overlying Jurrassic-Triassic metasedimentary basement is a ~500 ...

E., J. University of Nevada

Dec 31, 2013
1 Resources
0 Stars
Publicly accessible

EGS Collab Experiment 1: Circulation Testing Processed data

This submission includes processed and reduced data for circulation testing that was conducted at the 164' fracture on the 4850 ft level of the Sanford Underground Research Facility. The circulation tests were done to test the flow through the 164' fracture in the EGS Collab Exper...

Fu, P. et al Lawrence Livermore National Laboratory

Apr 01, 2021
7 Resources
0 Stars
Publicly accessible

Utah FORGE: Neubrex Well 16B(78)-32 Circulation Test Fiber Optics Monitoring Data and Reports July, 2023

This dataset features Distributed Acoustic Sensing (DAS) and fiber optics monitoring data acquired by Neubrex Energy Services during the Utah FORGE Well 16B(78)-32 circulation test in July 2023. DAS and fiber optic monitoring data include absolute strain, strain change, strain ch...

Jurick, D. and Guzik, A. Energy and Geoscience Institute at the University of Utah

Oct 31, 2023
1 Resources
0 Stars
Publicly accessible

Utah FORGE: InSAR Data Best Pairs

This submission provides Interferometric Synthetic Aperture Radar (InSAR) data covering the Utah FORGE site via the TerraSAR-X and TanDEM-X satellite missions operated by the German Space Agency (DLR). Data was collected between 2019/01/01 and 2023/06/30. Interferometric pairs (...

Batzli, S. and Feigl, K. University of Wisconsin Madison

May 31, 2023
11 Resources
0 Stars
Publicly accessible

Utah FORGE: Powder X-ray Diffraction Data from Well 16A(78)-32 Core

This dataset from Lawrence Livermore National Laboratory (LLNL) consists of four raw X-ray diffraction (XRD) scans and preliminary results of quantitative XRD analysis. The scanned samples were prepared from four subcores, which came from various depths of the FORGE well 16A(78)-3...

Kroll, K. et al Lawrence Livermore National Laboratory

Jul 27, 2023
1 Resources
0 Stars
Publicly accessible

Utah FORGE: Faults, Fractures, and Lineaments in the Mineral Mountains

This submission includes a shapefile of the Opal Mound Fault, and multiple datasets of lineaments mapped in the Mineral Mountains which overlook the Utah FORGE site, hyperlinked to rose diagrams in a polygon grid shapefile.

Moore, J. Energy and Geoscience Institute at the University of Utah

Mar 09, 2016
2 Resources
0 Stars
Publicly accessible

kISMET Final Report and Highlights

The files in this submission describes the results of a series of stress measurement and hydraulic fracturing experiments conducted at the Sanford Underground Research Facility (SURF) in Lead, SD. This report describes the accomplishments of the kISMET (permeability (k) and Induce...

Oldenburg, C. et al Lawrence Berkeley National Laboratory

Oct 31, 2016
2 Resources
0 Stars
Publicly accessible

Acquisition and Processing of a Detailed Aeromagnetic Survey Glass Buttes, Oregon

Using an ultra-light aircraft, a high-resolution aeromagnetic survey was carried out over Ormat Nevada's Glass Buttes project area in Oregon. Survey operations were completed on May 25, 2010. Average terrain clearance was 223 meters from the sensor. A total of 1,352 line-miles o...