Search GDR Data

Showing results 601 - 625 of 1197.
Show results per page.
Order by:
Available Now:
Technologies
Featured Projects
Topics
Data Type
"initial shut in pressure"×

University of Illinois Campus Deep Direct-Use Feasibility Study Regional Geology

Links to papers and reports describing the structure and character of the Illinois Basin geology. Included are descriptions of the two reservoirs that are being modeled for the DDU feasibility project at University of Illinois, the St. Peter and Mt. Simon Sandstones.
Lin, Y. et al University of Illinois
Mar 30, 2018
4 Resources
0 Stars
Publicly accessible

Utah FORGE: Updated Phase 2C Well Location Coordinates

Utah FORGE has been established to develop, test, and improve the technologies and techniques required to develop EGS-type geothermal resources. Drilling of the first of two deep deviated wells, 16A(78)-32, will begin in the second half of 2020. This well will serve as the injecti...
Hardwick, C. Utah Geological Survey
Dec 07, 2020
1 Resources
0 Stars
Publicly accessible

PoroTomo: BRAD, BRD1, and BRDY GPS Station RINEX Files April 26, 2016

This dataset provides links to daily RINEX files for two GPS stations at Brady's Hot Springs as of April 26, 2016. The data is formatted as compressed GNSS RINEX observation files, accessible through formatted CSV files, as well as in links to the complete daily time series data. ...
Kreemer, C. University of Nevada
Apr 26, 2016
8 Resources
0 Stars
Curated

Utah FORGE: Report and Associated Data from Measuring and Modeling Deformation 2018 through 2024

The report provided here describes research activities between August 16th, 2018 and July 30th, 2024. The goals of the research activities are to conduct an Interferometric Synthetic Aperture Radar (InSAR) analysis and Ground Surface Deformation Modeling at the Utah FORGE site. In...
Feigl, K. and Batzli, S. University of Wisconsin Madison
Aug 16, 2018
6 Resources
0 Stars
Publicly accessible

Utah FORGE: 2024 Discrete Fracture Network Model Data

The Utah FORGE 2024 Discrete Fracture Network (DFN) Model dataset provides a set of files representing discrete fracture network modeling for the FORGE site near Milford, Utah. The dataset includes four distinct DFN model file sets, each corresponding to different time frames and ...
Finnila, A. and Jones, C. Energy and Geoscience Institute at the University of Utah
Sep 08, 2024
5 Resources
0 Stars
Publicly accessible

Fracture Sustainability Test, Pre and Post-Test Photomicrographs

The primary objective of this research is to understand how different rock types, mineral and fluid compositions, and fracture surface textures determine the longevity of fracture apertures, so that selection of reservoir rock can be economically optimized to reduce future refract...
Dobson, P. et al Lawrence Berkeley National Laboratory
Sep 26, 2016
9 Resources
0 Stars
Publicly accessible

Distributed Acoustic Sensing Experiment Data from Garner Valley, California

In September 2013, an experiment using Distributed Acoustic Sensing (DAS) was conducted at Garner Valley, a test site of the University of California Santa Barbara (Lancelle et al., 2014). This submission includes all DAS data recorded during the experiment. The sampling rate ...
Lancelle, C. University of Wisconsin
Sep 11, 2013
14 Resources
0 Stars
Publicly accessible

Utah FORGE: Well 16B(78)-32 Core Photographs

This dataset includes images of core samples collected from Utah FORGE well 16B(78)-32. The images are stitched photographs showing the circumferential view of the cores exterior in two dimensions and the individual photos of the core taken at multiple angles used to construct the...
Jones, C. Energy and Geoscience Institute at the University of Utah
Nov 20, 2023
1 Resources
0 Stars
Publicly accessible

Hydroshear Simulation Lab Test 2, Additional Data Sheets

This file contains additional data for this test (hydroshear test 3.2). In this test a sample of granite with a pre-cut (man made fracture) is confined, heated and differential stress is applied. The max temperature in this this system development test is 95C. More test details ca...
Bauer, S. Sandia National Laboratories
Aug 01, 2014
2 Resources
0 Stars
Publicly accessible

Utah FORGE: Well and Spring Chemistry

This is a database containing water chemistry of wells and springs in Utah. The data is located at the Utah Geological Survey. This contains data relevant to the Utah FORGE project.
Moore, J. Energy and Geoscience Institute at the University of Utah
Jan 01, 2002
1 Resources
0 Stars
Publicly accessible

Strength Recovery of Cement Composites in Steam and Carbonate Environments

The data include compressive strength and Young's Modulus recoveries in steam and carbonate environments at 270 deg C for four chemically different cement composites after imposed controlled damaged.
Butcher, T. Brookhaven National Laboratory
Apr 28, 2016
1 Resources
0 Stars
Publicly accessible

Aqueous Rare Earth Elements, Concentration, and Stable Isotopes in Deep Basin Brines, Wyoming

Presentation given to National Groundwater Association meeting on deep basin brines. This presentation discusses why produced waters are being observed, the importance of REE's, the study areas examined, the data collected, and the relationship between REE concentration and possib...
Quillinan, S. et al University of Wyoming
Apr 25, 2017
1 Resources
0 Stars
Publicly accessible

PoroTomo: Horizontal Distributed Acoustic Sensing (DAS) Measurements During an M 2.3 Explosion

Included here are Distributed Acoustic Sensing (DAS) data collected by the horizontal DAS array at Brady's Hot Springs Geothermal Field. The system recorded this data during an M 2.3 explosion at the Nevada Test Site (NTS), which is located approximately 400km southeast of the fie...
Kratt, C. et al Center for Transformative Environmental Monitoring Programs (CTEMPs)
Dec 18, 2018
5 Resources
0 Stars
Publicly accessible

Community Geothermal: Soil Conductivity, Borehole Design, Energy Models, and Load Data for a Residential System Development Hinesburg, VT

This dataset contains materials from the Coalition for Community-Supported Affordable Geothermal Energy Systems (C2SAGES) project, which evaluated the techno-economic feasibility of a community geothermal system for a residential development in Hinesburg, VT. The dataset includes ...
Jogineedi, R. et al GTI Energy
Aug 30, 2024
56 Resources
0 Stars
Publicly accessible

Utah FORGE: Seismic Velocity Models, February 2021

This dataset contains a map, showing the Utah FORGE seismic stations, and seismic velocity model data. There are 61 1-D velocity models which are in a compressed TAR file. A paper is referenced at the end of this description which discusses the use of these data in 3D modelling. T...
Pankow, K. Energy and Geoscience Institute at the University of Utah
Feb 28, 2021
3 Resources
0 Stars
Publicly accessible

Utah FORGE 3-2535: Modeling Studies of Energized Steel-Casing Source EM Method for Detecting Stimulated Zone

Numerical modeling Studies for electromagnetic (EM) Data Acquisition Survey Design this milestone report describes the 3D modeling studies of energized steel-casing source electromagnetic method for detecting stimulated zone at the Utah FORGE Site. FORGE project 3-2535 is planning...
Um, E. et al Lawrence Berkeley National Laboratory
Feb 06, 2023
4 Resources
0 Stars
Publicly accessible

Utah FORGE: Southwestern Utah Magnetotelluric (MT) Data

This comprehensive magnetotellurics (MT) dataset, which covers southwestern Utah, integrates 600 sites from various surveys, including those from the Utah FORGE, SubTER, and Play Fairway projects, all of which are linked below. The core of this dataset is the use of a 3D finite el...
Wannamaker, P. and Marris, V. Energy and Geoscience Institute at the University of Utah
Jan 22, 2024
4 Resources
0 Stars
Publicly accessible

Energy Return On Investment of Engineered Geothermal Systems Data

The project provides an updated Energy Return on Investment (EROI) for Enhanced Geothermal Systems (EGS). Results incorporate Argonne National Laboratory's Life Cycle Assessment and base case assumptions consistent with other projects in the Analysis subprogram. EROI is a ratio o...
Mansure, C. Arthur Mansure
Jan 01, 2012
7 Resources
1 Stars
Publicly accessible

Utah FORGE 1-2410: Development of a Smart Completion and Stimulation Solution Workshop Presentation

This is a presentation on the Development of a Smart Completion & Stimulation Solution project by Welltec in collaboration with the University of Oklahoma, presented by Yosafat Esquitin, a Senior Business Development Manager at Welltec. The project's objective was to develop an an...
Esquitin, Y. et al Welltec
Sep 08, 2023
1 Resources
0 Stars
Publicly accessible

Utah FORGE 3-2418: Wellbore Fracture Imaging Using Inflow Detection Measurements Workshop Presentation

This is a presentation on the Wellbore Fracture Imaging Using Inflow Detection Measurements project by Stanford University, presented by Dr. Roland N. Horne. The project's objective was to make measurements in the Utah FORGE wells, both before and after fracturing experiments, to...
Horne, R. and Su, J. Stanford University
Sep 08, 2023
1 Resources
0 Stars
Publicly accessible

Utah FORGE 5-2557: Role of Fluid and Temperature in Fracture Mechanics and Couples THMC Processes for Enhanced Geothermal Systems 2024 Annual Workshop Presentation

This is a presentation on the Role of Fluid and Temperature in Fracture Mechanics and Couples THMC Processes for Enhanced Geothermal Systems by Purdue University, presented by Laura Pyrak-Nolte. This video slide presentation describes the development and validation of a macroscopi...
Pyrak-Nolte, L. Energy and Geoscience Institute at the University of Utah
Aug 13, 2024
1 Resources
0 Stars
Publicly accessible

Geologic Map and GIS Data for the Tuscarora Geothermal Area

Tuscarora-ESRI Geodatabase (ArcGeology v1.3): Contains all the geologic map data, including faults, contacts, folds, unit polygons, and attitudes of strata and faults. List of stratigraphic units and stratigraphic correlation diagram. Detailed unit descriptions of stratigraphic...
E., J. University of Nevada
Dec 31, 2013
1 Resources
0 Stars
Publicly accessible

3D Model of the San Emidio Geothermal Area

The San Emidio geothermal system is characterized by a left-step in a west-dipping normal fault system that bounds the western side of the Lake Range. The 3D geologic model consists of 5 geologic units and 55 faults. Overlying Jurrassic-Triassic metasedimentary basement is a ~500 ...
E., J. University of Nevada
Dec 31, 2013
1 Resources
0 Stars
Publicly accessible

Applications of Fractured Continuum Model to Enhanced Geothermal System Heat Extraction Problems

This paper describes the applications of the fractured continuum model to the different enhanced geothermal systems reservoir conditions. The capability of the fractured continuum model to generate fracture characteristics expected in enhanced geothermal systems reservoir environm...
Kalinina, E. et al Sandia National Laboratories
May 06, 2014
1 Resources
0 Stars
Publicly accessible

Geothermal Project Database Supporting Barriers and Viability Analysis for Development by 2020 Timeline

This data provides the underlying project-level analysis and data sources complied in response to the DOE request to determine the amount of geothermal capacity that could be available to meet the President's request to double renewable energy capacity by 2020. The enclosed dat...
Wall, A. and Young, K. National Renewable Energy Laboratory
Oct 21, 2014
2 Resources
1 Stars
Publicly accessible
<< Previous20212223242526272829Next >>