Search GDR Data
Showing results 1 - 25 of 65.
Show
results per page.
Order by:
Available Now:
Topic
Technologies
Demonstration Sites
Data Type
Critically stressed fault segments have a relatively high likelihood of acting as fluid flow conduits (Sibson, 1994). As such, the tendency of a fault segment to slip or to dilate provides an indication of which faults or fault segments within a geothermal system are critically st...
Critically stressed fault segments have a relatively high likelihood of acting as fluid flow conduits (Sibson, 1994). As such, the tendency of a fault segment to slip (slip tendency; Ts; Morris et al., 1996) or to dilate (dilation tendency; Td; Ferrill et al., 1999) provides an in...
Critically stressed fault segments have a relatively high likelihood of acting as fluid flow conduits (Sibson, 1994). As such, the tendency of a fault segment to slip (slip tendency; Ts; Morris et al., 1996) or to dilate (dilation tendency; Td; Ferrill et al., 1999) provides an in...
Critically stressed fault segments have a relatively high likelihood of acting as fluid flow conduits (Sibson, 1994). As such, the tendency of a fault segment to slip (slip tendency; Ts; Morris et al., 1996) or to dilate (dilation tendency; Td; Ferrill et al., 1999) provides an in...
Slip and Dilation Tendency in focus areas
Critically stressed fault segments have a relatively high likelihood of acting as fluid flow conduits (Sibson, 1994). As such, the tendency of a fault segment to slip (slip tendency; Ts; Morris et al., 1996) or to dilate (dilation tendency...
Slip and Dilation Tendency in focus areas
Critically stressed fault segments have a relatively high likelihood of acting as fluid flow conduits (Sibson, 1994). As such, the tendency of a fault segment to slip (slip tendency; Ts; Morris et al., 1996) or to dilate (dilation tendency...
Shapefiles and spreadsheets of structural data, including attitudes of faults and strata and slip orientations of faults.
Detailed geologic mapping of ~30 km2 was completed in the vicinity of the Columbus Marsh geothermal field to obtain critical structural data that would elucid...
Salt Wells-ESRI Geodatabase (ArcGeology v1.3):
Contains all the geologic map data, including faults, contacts, folds, dikes, unit polygons, and attitudes of strata and faults.
List of stratigraphic units and stratigraphic correlation diagram.
Locations of 40Ar/39Ar samples.
This layer contains the regional faults of Colorado. The geodatabase includes show faults throughout Colorado and can be accessed with a GIS software.
This is a zipped ArcGIS shapefile containing faults mapped for the Tularosa Basin geothermal play fairway analysis project. The faults were interpolated from gravity and seismic (NASA area) data, and from geomorphic features on aerial photography. Field work was also done for vali...
Patua-ESRI Geodatabase (ArcGeology v1.3):
Contains all the geologic map data, including faults, contacts, folds, veins, dikes, unit polygons, and attitudes of strata and faults.
List of stratigraphic units.
Locations of geothermal wells.
Locations of 40Ar/39Ar and tephra samples.
The McGinness Hills geothermal system lies in a ~8.5 km wide, north-northeast trending accommodation zone defined by east-dipping normal faults bounding the Toiyabe Range to the west and west-dipping normal faults bounding the Simpson Park Mountains to the east. Within this broad ...
Neal Hot Springs-ESRI Geodatabase (ArcGeology v1.3):
Contains all the geologic map data, including faults, contacts, folds, unit polygons,
and attitudes of strata and faults.
List of stratigraphic units and stratigraphic correlation diagram.
Three cross-sections.
Locations of ...
Tuscarora-ESRI Geodatabase (ArcGeology v1.3):
Contains all the geologic map data, including faults, contacts, folds, unit polygons, and attitudes of strata and faults.
List of stratigraphic units and stratigraphic correlation diagram.
Detailed unit descriptions of stratigraphic...
Wabuska-ESRI geodatabase (ArcGeology v1.3):
Contains all the geologic map data, including faults, contacts, folds, veins, dikes, unit polygons, and attitudes of strata.
List of stratigraphic units and stratigraphic correlation diagram.
One cross-section.
The Tuscarora geothermal system sits within a ~15 km wide left-step in a major west-dipping range-bounding normal fault system. The step over is defined by the Independence Mountains fault zone and the Bull Runs Mountains fault zone which overlap along strike. Strain is transferre...
Geologic map data in shapefile format that includes faults, unit contacts, unit polygons, attitudes of strata and faults, and surficial geothermal features.
5 cross-sections in Adobe Illustrator format.
Comprehensive catalogue of drill-hole data in spreadsheet, shapefile, and Ge...
This submission includes a fault map of the Oregon Cascades and backarc, a probability map of heat flow, and a fault density probability layer. More extensive metadata can be found within each zip file.
For information about "Oregon Faults," contact John David Trimble, Oregon Sta...
This is a digitized geologic map, in shapefile format, including rock unit lithological descriptions, faults, and dikes.
Structural orientations (fractures, joints, faults, lineaments, bedding orientations, etc.) were collected with a standard Brunton compass during routine field examinations of geothermal phenomena in Colorado. Often multiple orientations were taken from one outcrop. Care was taken...
Matlab scripts and functions and data used to build Poly3D models and create permeability potential layers for 1) St. Helens Shear Zone, 2) Wind River Valley, and 3) Mount Baker geothermal prospect areas located in Washington state.
The San Emidio geothermal system is characterized by a left-step in a west-dipping normal fault system that bounds the western side of the Lake Range. The 3D geologic model consists of 5 geologic units and 55 faults. Overlying Jurrassic-Triassic metasedimentary basement is a ~500 ...
The Neal Hot Springs geothermal system lies in a left-step in a north-striking, west-dipping normal fault system, consisting of the Neal Fault to the south and the Sugarloaf Butte Fault to the north (Edwards, 2013). The Neal Hot Springs 3D geologic model consists of 104 faults and...
Slip and dilation tendency on the Great Basin fault surfaces (from the USGS Quaternary Fault Database) were calculated using 3DStress (software produced by Southwest Research Institute).
Slip and dilation tendency are both unitless ratios of the resolved stresses applied to the f...
This dataset contains a variety of data about the Fort Bliss geothermal area, part of the southern portion of the Tularosa Basin, New Mexico. The dataset contains schematic models for the McGregor Geothermal System, a shallow temperature survey of the Fort Bliss geothermal area. ...
Google Map