Search GDR Data
Showing results 1 - 25 of 51.
Show
results per page.
Order by:
Available Now:
Topic
Technologies
Demonstration Sites
Data Type
This submission contains Downhole geophysical logs associated with Wister, CA Wells 12-27 and 85-20. The logs include Spontaneous Potential (SP), HILT Caliper (HCAL), Gamma Ray (GR), Array Induction (AIT), and Neutron Porosity (NPOR) data. Also included are a well log, Injection T...
The Newberry Volcano EGS Demonstration in central Oregon, a 5 year project begun in 2010, tests recent technological advances designed to reduce the cost of power generated by EGS in a hot, dry well (NWG 55-29) drilled in 2008. First, the stimulation pumps used were designed to ru...
The Newberry Volcano EGS Demonstration in central Oregon, a 3 year project started in 2010, tests recent technological advances designed to reduce the cost of power generated by EGS in a hot, dry well (NWG 55-29) drilled in 2008. First, the stimulation pumps used were designed to ...
This document provides a pre-drill prognosis for the Gold 2-P well at Fervo's Cape Project site, highlighting temperature and lithology projections. Elements include well trajectory schematics, a temperature-depth profile, and geologic cross sections. The temperature is estimated...
Numerical modeling Studies for electromagnetic (EM) Data Acquisition Survey Design this milestone report describes the 3D modeling studies of energized steel-casing source electromagnetic method for detecting stimulated zone at the Utah FORGE Site. FORGE project 3-2535 is planning...
This short report details and tests the workflow that will be used to simulate steel well casings in deviated production/extraction boreholes at at the Utah FORGE site. Boreholes will be electrically energized and will serve as data sources for future proposed electromagnetic bore...
This engineering design and specification document contains the applications, specifications, testing, materials, and running methods for the Open-Hole Packer. The Open Hole Packer is designed to seal 8.5 to 9.75 inch open-holes with a 7 inch casing. The design is intended to seal...
For the model calculation we applied EM3D using completion diagram of CaMI site and a background resistivity consistent with the borehole logs. It was also important to use the accurate position of the return electrode. We note that for the data fit the code also incorporated we...
The coaxial-cable experiment conducted in the lab was with 80 m coaxial cable( RG-85). This experiment compares the TDR response between damaged and undamaged cable. For the damaged cable, the damaged section is in the middle (40 m). The amplitude of the data is mV with time (us).
This is an installation report detailing placement of the integrated fiber-optic cable behind casing in Utah FORGE well 16B(78)-32. These activities occurred in July of 2023 immediately after the drilling of 16B. This report was prepared by the FOGMORE R&D project (Fiber Optic MOn...
This dataset contains project data generated by the project "Evaluation Of Physics-Based Drilling and Alternative Bit Design At The Geysers." It includes drilling, downhole drilling dynamics, bit records, daily drilling reports, directional surveys, lithology and mineralogy data, ...
Well completions are an integral part of providing safe, reliable and continuous access to underground resources such as oil, gas and geothermal resources. Completions are typically considered to be the final step of drilling engineering which includes processes such as setting c...
This test was conducted at the Chevron Cymric oilfield in the California central valley near Bakersfield. A reflected seismic signal was observed in all three components (x, y, z) of the 3-component Episensor geophone, as well as all phones on the single component array. The arriv...
The main goal of this project is to develop an annular isolation system capable to withstand geothermal downhole conditions and mitigate the problems experienced by conventional packers in FORGE wells. This presentation outlines the work in rock modelling and interaction with the ...
A table of cement formulations tested by Brookhaven National Laboratory in 2016-2017 in the frame of the "Self-healing and Re-Adhering Cements with Improved Toughness at Casing and Formation Interfaces for Geothermal Wells" project.
The objective of this field test is to validate several technologies for non-invasive well integrity assessment using existing wells with a known completion. The tests were made at the Cymric oil field, which is a steam flood operation. The wells therefore undergo similar downhole...
Report on possible geodetic signature of the 3 stimulations in April 2022 as well as a comparison with existing InSAR data gathered over the site before, during, and after the stimulation. In geothermal production it is important to understand the existing stress field and the cha...
The included report outlines the creation of three 3D resistivity models that will be used to determine the sensitivity of EM measurements for the hypothetical stimulated reservoir at FORGE as well as for EM survey design. FORGE project 3-2535 is planning on using a casing source ...
This dataset compiles information on geothermal wells drilled into supercritical and near-supercritical conditions, with a focus on drilling and completion materials, fluid chemistry, and laboratory validation studies. The data are drawn from well reports, scientific literature, a...
This report outlines electromagnetic field measurements that were made after stimulation at Utah FORGE in May of 2024. The measurements involved lowering an electrode to ~3500' in well 16A to energize the steel casing as part of the electric source, with the return electrode locat...
This document provides the applications, specifications, testing, materials, and running methods for the engineering team at PertoQuip to design the Locking Bridge Plug (LBP) and the Landing Profile (LP). This is the first step in developing a new tool for. The report includes ap...
The Hawaii Play Fairway Project deepened an already existing water well in Palawai Basin, Lanai island. Lanai Well #10 was deepened from 427 m to ~1057 m, with nearly continuous rock core collected. Spanning the dates from May 13 to July 5, 2019, the daily drilling reports of Lana...
This paper discusses the progress on a project funded by the DOE Utah FORGE (Frontier Observatory for Research in Geothermal Energy) for the development of a subsurface heat exchanger for Enhanced Geothermal Systems (EGS) using unique casing sleeves cemented in place and are used ...
The Newberry Volcano EGS Demonstration in central Oregon, a 5 year project begun in 2010, tests recent technological advances designed to reduce the cost of power generated by EGS in a hot, dry well (NWG 55-29) drilled in 2008. First, the stimulation pumps used were designed to ru...
This report describes a comprehensive review of 49 existing supercritical geothermal wells to inform future geothermal drilling attempts and avoid previous failure points and understand material and testing limitations, while collating information gathered in a publicly accessible...
Google Map