Search GDR Data

Modeling Responses of Naturally Fractured Geothermal Reservoir to Low-Pressure Stimulation

Hydraulic shearing is an appealing reservoir stimulation strategy for Enhanced Geothermal Systems. It is believed that hydro-shearing is likely to simulate a fracture network that covers a relatively large volume of the reservoir whereas hydro-fracturing tends to create a small nu...

Fu, P. and Carrigan, C. Lawrence Livermore National Laboratory

Jan 01, 2012
2 Resources
0 Stars
Publicly accessible

Devices Suitable for Sectional Isolation Along Both Cased and Open-hole Wellbores Large-scale Test Setup

The main goal of this project is to develop an annular isolation system capable to withstand geothermal downhole conditions and mitigate the problems experienced by conventional packers in FORGE wells. This large-scale set-up report is about the system that has been constructed to...

Teodoriu, C. et al Welltec

Jan 31, 2023
2 Resources
0 Stars
Publicly accessible

Devices Suitable for Sectional Isolation Along Both Cased and Open-hole Wellbores Pipe Preparation Report

The main goal of this project is to develop an annular isolation system capable to withstand geothermal downhole conditions and mitigate the problems experienced by conventional packers in FORGE wells. This pipe preparation report is based on the test pipe that was procured and pr...

Teodoriu, C. et al Welltec

Mar 31, 2023
2 Resources
0 Stars
Publicly accessible

Nanofiltration Results: Membrane Removal of Calcium, Magnesium, Sodium, Silica, Lithium, Chlorine, and Sulfate from Simulated Geothermal Brines

Results from a nanofiltration study utilizing simulated geothermal brines. The data includes a PDF documenting the process used to remove Calcium, Magnesium, Sodium, Silica, Lithium, Chlorine, and Sulfate from simulated geothermal brines. Three different membranes were evaluated...

Renew, J. Southern Research Institute

Feb 06, 2016
1 Resources
0 Stars
Publicly accessible

Improved Rare Earth Element Sorption from Simulated Geothermal Brines: Effect of Gassed versus Degassed Brines

A study exploring sorption and stripping characteristics of sorption media when simulated geothermal brines are degassed or not degassed. Experiments were done at 70degC. The brines used in this study were formulated by Tusaar. The two brines used/simulated are labeled 1M and 1C...

Stull, D. Tusaar Corp.

May 24, 2016
2 Resources
0 Stars
Publicly accessible

Utah FORGE 3-2417: Meteorological Data During 2024 Stimulation

This preliminary data archive includes meteorological data recorded at the Utah FORGE facility over the period of time including the 16A/16B stimulation activities, largely March/April/May of 2024. This information may prove useful for understanding seismic and other instrumentati...

Ajo-Franklin, J. Rice University

May 09, 2024
5 Resources
0 Stars
Publicly accessible

Chemical Fracture Detection During Triaxial Deformation Tests

A set of triaxial tests with sandstone, limestone, and granite samples was conducted to measure fluid chemistry before, during, and after rock fracture. The dataset here includes: 1) five triaxial test data files (xlxs), 2) one file containing the measured test tube volumes for th...

Kibikas, W. Sandia National Laboratories

Aug 19, 2025
3 Resources
0 Stars
Curated

Effective Elastic and Neutron Capture Cross Section Calculations Corresponding to Simulated Fluid Properties from CO2 Push-Pull Simulations

The submission contains a .xls files consisting of 10 excel sheets, which contain combined list of pressure, saturation, salinity, temperature profiles from the simulation of CO2 push-pull using Brady reservoir model and the corresponding effective compressional and shear velocity...

Chugunov, N. and Altundas, B. Lawrence Berkeley National Laboratory

Mar 07, 2018
1 Resources
0 Stars
Publicly accessible

Utah FORGE: Wells 16A(78)-32 and 16B(78)-32 Extended Circulation Test Data August and September 2024

The dataset includes data collected during an extended circulation test conducted at the Utah FORGE site between August 8 and September 5, 2024. It provides uncorrected, raw digital data from the test, along with calibration information and a final report detailing the test proced...

McLennan, J. et al Energy and Geoscience Institute at the University of Utah

Oct 11, 2024
1 Resources
0 Stars
Publicly accessible

Utah FORGE: LBNL Status Report on the VEMP Tool 2024

This report describes the modifications made to the Vertical Electromagnetic Profiling (VEMP) borehole tool, currently on loan to Lawrence Berkeley National Laboratory (LBNL) from Japan's Geothermal Energy Research and Development Co., Ltd. (GERD), during its refurbishment. It inc...

Wilt, M. et al Lawrence Berkeley National Laboratory

Feb 16, 2024
1 Resources
1 Stars
Publicly accessible

Utah FORGE: Well 16A(78)-32 Stimulation Data (April, 2022)

This is a set of data related to the stimulation program at Utah FORGE well 16A(78)-32 during April, 2022. This includes daily reports, 1 second Pason data, tracer data, and shear stimulation data and information including a report of an evolving prognosis for the stimulation oper...

McLennan, J. Energy and Geoscience Institute at the University of Utah

May 18, 2022
11 Resources
0 Stars
Publicly accessible

Utah FORGE: Logs and Data from Deep Well 58-32 (MU-ESW1)

Data, logs, and graphics associated with the drilling and testing of Utah FORGE deep test well 58-32 (MU-ESW1) near Roosevelt Hot Springs.

Nash, G. and Moore, J. Energy and Geoscience Institute at the University of Utah

Apr 11, 2018
11 Resources
0 Stars
Publicly accessible

Numerical Modeling for Hydraulic Fracture Prediction

Numerical modeling on fused silica cylindrical materials for predicting overpressures required to fracture an homogeneous pure (surrogate) material with known mechanical properties similar to igneous rock materials and later compare these values to experimental overpressures obtai...

Gupta, V. Pacific Northwest National Laboratory

Apr 26, 2016
1 Resources
0 Stars
Publicly accessible

Tracerco High Temperature Tracer Thermal Stability Testing Report

This report presents thermal stability testing of fifteen Tracerco water tracers exposed to 250C for 48 hours. Tracer concentrations were compared using HPLC, with samples grouped based on retention time. Three tracers, HTP-001, HTP-002, and HTP-005, retained over 90% of their ori...

Leggett, S. Texas Tech University

Apr 11, 2025
1 Resources
0 Stars
Curated

Reservoir Stimulation Optimization with Operational Monitoring for Creation of EGS

EGS field projects have not sustained production at rates greater than half of what is needed for economic viability. The primary limitation that makes commercial EGS infeasible is our current inability to cost-effectively create high-permeability reservoirs from impermeable, igne...

A., C. Pacific Northwest National Laboratory

Sep 25, 2013
19 Resources
0 Stars
Publicly accessible

Utah FORGE: Triaxial Direct Shear Results

This submission contains a report and associated data from triaxial direct shear tests conducted by Los Alamos National Laboratory. The samples used were sourced from 16A(78)-32 well core. The primary objectives of this test were to determine the shear strength in both intact an...

Frash, L. et al Los Alamos National Laboratory

Aug 14, 2023
2 Resources
0 Stars
Publicly accessible

Sorption Capacity of Europium for Media 1 and Media 2 from Solution at Ambient Temperature

This dataset shows the capacity for Europium of media #1 and media #2 in a shakertable experiment. The experimental conditions were 150mL of 500ppm Eu solution, 2g of media, pH of 3.2, at ambient temperature.

Garland, G. Tusaar Corp.

Mar 16, 2015
2 Resources
0 Stars
Publicly accessible

Rare Earth Desorption Test with Citrate and Bicarbonate

LBT (lanthanide binding tag) cells were grown overnight in LB media with 0.05% Amp. 1:100 subculture taken from overnights, grown for 2 hours. LBT was induced with 0.002% arabinose added for 3 hours. REE adsorption was done by combining 350 ul (0.25% 1M MES, 12.5 uM Tb, and 12.5 u...

Jiao, Y. et al Lawrence Livermore National Laboratory

Jun 01, 2017
1 Resources
0 Stars
Publicly accessible

Utah FORGE 3-2535: Final Report on Joint Electromagnetic, Seismic, and InSAR Imaging of Fracture Growth During EGS Resource Development

This dataset contains the final technical report for the project Joint Electromagnetic/Seismic/InSAR Imaging of Spatial-Temporal Fracture Growth and Estimation of Physical Fracture Properties During EGS Resource Development, carried out from 2021 to 2025 by Lawrence Berkeley Natio...

Alumbaugh, D. Lawrence Berkeley National Laboratory

May 30, 2025
1 Resources
0 Stars
Curated

Utah FORGE: Well 16A(78)-32 and 16B(78)-32 Stimulation Production Logging Tests

These are production logging tests (PLT) results from Halliburton collected during the nine hour circulation test performed at Utah FORGE on April 27th, 2024. The circulation test involved injecting into well 16A(78)-32 and producing out of well 16B(78)-32) and was carried out af...

Haroun, F. Energy and Geoscience Institute at the University of Utah

Apr 27, 2024
4 Resources
1 Stars
Publicly accessible

Utah FORGE 3-2417: Pulsed Interference Tests at Wells 16A(78)-32 and 16B(78)-32 September 2024

This archive contains data and a report from Pulse Interference Tests (PITs), which were conducted on September 4, 2024, immediately following a 30-day recirculation test at the Utah FORGE site. Injection and backflow were induced in well 16A(78)-32 while pressures were measured i...

W Becker, M. et al Rice University

Mar 18, 2025
3 Resources
0 Stars
Publicly accessible

Utah FORGE: Well 14-2 Logs and Data from Roosevelt Hot Spring Area

This is a compilation of logs and data from Well 14-2 in the Roosevelt Hot Springs area in Utah. This well is also in the Utah FORGE study area. Data includes: flowmeter survey (1989), geochemistry (1977-1978, 1977-1983), injection test data (1979, 1982), and spinner surveys (19...

Moore, J. Energy and Geoscience Institute at the University of Utah

Mar 03, 2016
1 Resources
0 Stars
Publicly accessible

Utah FORGE: Native State Numerical Model 2025 Update

This dataset contains a three-dimensional native-state numerical model of the Utah FORGE site, updated in 2025, representing thermal, hydraulic, and stress conditions within the granitic reservoir and overlying sedimentary formations. The model domain extends 6 km by 6 km laterall...

Vazic, B. et al Idaho National Laboratory

Jan 30, 2026
1 Resources
0 Stars
Curated

Utah FORGE: Milford Triaxial Test Data and Summary from EGI labs

Six samples were evaluated in unconfined and triaxial compression, their data are included in separate excel spreadsheets, and summarized in the word document. Three samples were plugged along the axis of the core (presumed to be nominally vertical) and three samples were plugged ...