Search GDR Data

Utah FORGE 7-3639: Design and Implementation of a Novel Multi-Frac Stimulation Concept 2024 Annual Workshop Presentation

This is a presentation on the Design and Implementation of a Novel Multi-Frac Stimulation Concept by The University of Oklahoma, presented by Ahmad Ghassemi. This slide presentation video discusses the design and implementation of a reservoir stimulation concept improving near-wel...

Ghassemi, A. and Jeffery, R. Energy and Geoscience Institute at the University of Utah

Sep 02, 2024
1 Resources
0 Stars
Curated

Devices Suitable for Sectional Isolation Along Both Cased and Open-hole Wellbores Large-scale Test Setup

The main goal of this project is to develop an annular isolation system capable to withstand geothermal downhole conditions and mitigate the problems experienced by conventional packers in FORGE wells. This large-scale set-up report is about the system that has been constructed to...

Teodoriu, C. et al Welltec

Jan 31, 2023
2 Resources
0 Stars
Publicly accessible

Utah FORGE 3-2535: Numerical Modeling of Energized Steel-Casing Source for Imaging Stimulated Zone

This short report details and tests the workflow that will be used to simulate steel well casings in deviated production/extraction boreholes at at the Utah FORGE site. Boreholes will be electrically energized and will serve as data sources for future proposed electromagnetic bore...

Um, E. et al Lawrence Berkeley National Laboratory

Nov 15, 2022
4 Resources
0 Stars
Curated

Laboratory Evaluation of EGS Shear Stimulation-Test 001

This is the results of an initial setup-shakedon test in order to develop the plumbing system for this test design. a cylinder of granite with offset holes was jacketed and subjected to confining pressure and low temperature (85C) and pore water pressure. Flow through the sample w...

Bauer, S. Sandia National Laboratories

Jul 29, 2014
1 Resources
0 Stars
Publicly accessible

Utah FORGE: 2022 Seismic Workshop Report

Utah FORGE held a two-day seismic workshop on the University of Utah campus in Salt Lake City, Utah on September 26 and 27, 2022 to share what was learned from the seismic monitoring during the 2022 stimulation. This is a report documenting this workshop. The meeting was structure...

Pankow, K. University of Utah Seismograph Stations

Dec 19, 2022
1 Resources
0 Stars
Curated

Utah FORGE 4-2492: Design and Implementation of Innovative Stimulation Treatments to Maximize Energy Recovery 2024 Annual Workshop Presentation

This is a presentation on the Design and Implementation of Innovative Stimulation Treatments to Maximize Energy Recovery Efficiency by The University of Texas at Austin, presented by Mukul M. Sharma. This video slide presentation discusses the following objectives: (1) to place fr...

Sharma, M. Energy and Geoscience Institute at the University of Utah

Sep 16, 2024
1 Resources
0 Stars
Curated

COMSOL Models and Simulation Results for Closed-Loop Geothermal Systems with Thermal Enhancements

The Closed-Loop Geothermal Working Group and the National Renewable Energy Laboratory (NREL) have studied the performance of disc-shaped and linear thermal enhancements (conductive material introduced around a wellbore) in closed-loop geothermal systems. COMSOL models were develop...

Beckers, K. et al National Renewable Energy Laboratory

Dec 15, 2023
4 Resources
0 Stars
Publicly accessible

Pressure Sensor and Telemetry Methods for Measurement while Drilling in Geothermal Wells

Project status report as of end of 2011. Key milestones and accomplishments in the year 2011 include: Proof of feasibility of analog and digital components with their lifetime tested for more than 500 hours at 300 degrees C, Demonstration of ceramic-based packaging capable of su...

Vert, A. GE Global Research

Jan 01, 2012
1 Resources
0 Stars
Publicly accessible

Utah FORGE: Video of Utah FORGE Drilling Planning for Production Well 16B(78)-32

This is a YouTube video containing the specifics of well planning for Utah FORGE 16B(78)-32. This well will be drilled as a doublet approximately 300 feet parallel to and above 16A(78)-32 and will be drilled between approximately April 15th and July 17th 2023.

McLennan, J. Energy and Geoscience Institute at the University of Utah

Mar 03, 2023
2 Resources
0 Stars
Publicly accessible

Utah FORGE: Phase 3A, Year 2, Annual Report

This is the annual report for Utah FORGE Phase 3A, year two, which was published on July 28th, 2022. The report includes site infrastructure, site operations, seismic monitoring reports, FORGE modeling reports, and external research and design. The ultimate objective of Utah FORGE...

Moore, J. et al Energy and Geoscience Institute at the University of Utah

Jul 29, 2022
1 Resources
0 Stars
Curated

Utah FORGE 3-2417: Well 16B(78)-32 Fiber-Optic Cable Installation Report

This is an installation report detailing placement of the integrated fiber-optic cable behind casing in Utah FORGE well 16B(78)-32. These activities occurred in July of 2023 immediately after the drilling of 16B. This report was prepared by the FOGMORE R&D project (Fiber Optic MOn...

Ajo-Franklin, J. et al Rice University

May 15, 2024
1 Resources
0 Stars
Curated

Utah FORGE 3-2535: Compilation of Geodetic Data and Estimation of Associated Deformation

Report on possible geodetic signature of the 3 stimulations in April 2022 as well as a comparison with existing InSAR data gathered over the site before, during, and after the stimulation. In geothermal production it is important to understand the existing stress field and the cha...

Vasco, D. et al Lawrence Berkeley National Laboratory

Apr 29, 2022
4 Resources
0 Stars
Curated

Community Geothermal: Energy, Cost, and Carbon Modeling for District Design Ann Arbor, MI

This data includes results on an analysis of existing and projected energy, cost, and carbon for the City of Ann Arbor District Geothermal Design and Deployment to Equitably Decarbonize Low Income Neighborhoods in Ann Arbor project. The scope of the project includes designing and ...

Lee, J. and McMillen, A. IMEG Corp

Jan 01, 2024
31 Resources
0 Stars
Curated

Geothermal Exploration of Newberry Volcano, Oregon Summary Report

Abstract: Davenport Newberry (Davenport) has completed 8 years of exploration for geothermal energy on Newberry Volcano in central Oregon. Two deep exploration test wells were drilled by Davenport on the west flank of the volcano, one intersected a hydrothermal system; the other ...

Waibel, A. et al Southern Methodist University

Jan 01, 2015
1 Resources
0 Stars
Publicly accessible

Community Geothermal: Final Thermal Conductivity Test Report and Data Logs Carbondale, CO

Provided here are a final thermal conductivity test report, a drilling log, and a heat rejection log from Carbondale, CO. Also attached is a report made before drilling, which contains predictions on the hydrogeologic conditions of the drill site. The forty-eight (48.9) hour in-si...

Ewbank, G. et al Clean Energy Economy for the Region (CLEER)

Oct 20, 2023
4 Resources
0 Stars
Curated

EGS Collab: Modeling and Simulation Working Group Teleconference Series (129-130)

This submission contains the presentation slides and recordings from EGS Collab Modeling and Simulation Working Group (MSWG) teleconferences number 129 through 130. These teleconferences served three objectives for the project: 1) share simulation results, 2) communicate field act...

White, M. et al Pacific Northwest National Laboratory

Jun 22, 2022
3 Resources
0 Stars
Publicly accessible

Utah FORGE 4-2492: Design and Implementation of Innovative Stimulation Treatments to Maximize Energy Recovery Workshop Presentation

This is a presentation on the Design and Implementation of Innovative Stimulation Treatments to Maximize Energy Recovery Efficiency at the Utah FORGE Site project by The University of Texas at Austin, presented by Professor Mukul M. Sharma. The project's objectives were to place f...

Sharma, M. The University of Texas at Austin

Sep 08, 2023
1 Resources
0 Stars
Publicly accessible

Utah FORGE 3-2417: Simulations for Distributed Acoustic Sensing Strain Signatures as an Indicator of Fracture Connectivity

This dataset encompasses simulations of strain signatures from both hydraulically connected and "near-miss" fractures in enhanced geothermal systems (EGS). The files and results are presented from the perspective of digital acoustic sensing's (DAS) potential to differentiate the t...

Ward-Baranyay, M. et al Rice University

Jan 01, 2023
4 Resources
0 Stars
Curated

Salton Sea Geodatabase for Geothermal Exploration Artificial Intelligence

These files contain the geodatabases related to Salton Sea Geothermal Field. It includes all input and output files used with the Geothermal Exploration Artificial Intelligence. Input and output files are sorted into three categories: raw data, pre-processed data, and analysis (po...

Moraga, J. et al Colorado School of Mines

Apr 27, 2021
3 Resources
0 Stars
Publicly accessible

Utah FORGE 4-2541: Optimization and Validation of a Plug-and-Perf Stimulation Treatment Design Workshop Presentation

This is a presentation on the Optimization and Validation of a Plug-and-Perf Stimulation Treatment Design at Utah FORGE project by Fervo Energy, presented by Sireesh Dadi. The project's objective was to develop a multistage hydraulic stimulation approach designed specifically to t...

Dadi, S. and Norbeck, J. Fervo Energy

Sep 08, 2023
1 Resources
0 Stars
Publicly accessible

University of Illinois Campus Deep Direct-Use Feasibility Study Designs for Deep Injection and Monitoring Wells

The following information is provided about the design of deeps wells constructed in the Illinois Basin to store, sequester, or dispose of CO2, natural gas, and industrial wastes.

Lin, Y. et al University of Illinois

Mar 30, 2018
3 Resources
0 Stars
Publicly accessible

Coupling Subsurface and Above-Surface Models for Optimizing the Design of Borefields and District Heating and Cooling Systems

Accurate dynamic energy simulation is important for the design and sizing of district heating and cooling systems with geothermal heat exchange for seasonal energy storage. Current modeling approaches in building and district energy simulation tools typically consider heat conduct...

Hu, J. et al Lawrence Berkeley National Laboratory

Jan 31, 2022
10 Resources
0 Stars
Publicly accessible

Community Resilience through Low-Temperature Geothermal Reservoir Thermal Energy Storage

Submitted data include simulations related to underground thermal battery (UTB) simulations described in Modeling and efficiency study of large scale underground thermal battery deployment, presented at GRC, October 2021. The UTB is comprised of a tank of water, a helical heat ex...

Nico, P. et al Lawrence Berkeley National Laboratory

Jan 29, 2022
4 Resources
0 Stars
Publicly accessible

Newberry EGS Demonstration: Repairing and Re-Stimulating Well 55-29 Report

The Newberry Volcano EGS Demonstration in central Oregon, a 5 year project begun in 2010, tests recent technological advances designed to reduce the cost of power generated by EGS in a hot, dry well (NWG 55-29) drilled in 2008. First, the stimulation pumps used were designed to ru...

Cladouhos, T. et al AltaRock Energy Inc

Jul 03, 2015
2 Resources
0 Stars
Curated

Utah FORGE: Discrete Fracture Network and Fracture Propagation Modelling

Design and Implementation of Innovative Stimulation Treatments to Maximize Energy Recovery Efficiency at the Utah Forge Site

Sharma, M. and Cao, M. University of Texas

Feb 07, 2023
1 Resources
0 Stars
Publicly accessible

<< Previous 1 2 3 4 5 6 Next >>