Search GDR Data
Showing results 76 - 100 of 205.
Show
results per page.
Order by:
Available Now:
Technologies
Featured Projects
Topics
Data Type
Fallon FORGE: 3D Geologic Model
An x,y,z scattered data file for the 3D geologic model of the Fallon FORGE site. Model created in Earthvision by Dynamic Graphic Inc. The model was constructed with a grid spacing of 100 m. Geologic surfaces were extrapolated from the input data using a minimum tension gridding al...
Blankenship, D. Sandia National Laboratories
Mar 01, 2016
1 Resources
0 Stars
Publicly accessible
1 Resources
0 Stars
Publicly accessible
Utah FORGE: Leapfrog 3D Geologic Movie
This is a 3D geological movie of the Utah FORGE area created with Leapfrog Geothermal 3D modelling software. The movie shows the Utah FORGE site, wells, seismic and lithologic cross-sections, and rock unit tops. This illustrates the thick crystalline granitoid EGS reservoir.
Podgorney, R. Energy and Geoscience Institute at the University of Utah
May 18, 2018
1 Resources
0 Stars
Publicly accessible
1 Resources
0 Stars
Publicly accessible
Utah FORGE 3-2535: Building a 3D Resistivity Model for Simulation and Survey Design of EM Measurements
The included report outlines the creation of three 3D resistivity models that will be used to determine the sensitivity of EM measurements for the hypothetical stimulated reservoir at FORGE as well as for EM survey design. FORGE project 3-2535 is planning on using a casing source ...
Alumbaugh, D. et al Lawrence Berkeley National Laboratory
Dec 01, 2022
5 Resources
0 Stars
Publicly accessible
5 Resources
0 Stars
Publicly accessible
A Conceptual Geologic Model for the Newberry Volcano EGS Site in Central Oregon: Constraining Heat Capacity and Permeability through Interpretation of Multicomponent Geosystems Data
Newberry Volcano, a voluminous (500 km3) basaltic/andesitic/rhyolitic shield volcano located near the intersection of the Cascade volcanic arc, the Oregon High Lava Plains and Brothers Fault Zone, and the northern Basin and Range Province, has been the site of geothermal explorati...
Mark-Moser, M. et al National Energy Technology Laboratory
Feb 22, 2016
1 Resources
0 Stars
Publicly accessible
1 Resources
0 Stars
Publicly accessible
Newberry EGS Seismic Velocity Model
We use ambient noise correlation (ANC) to create a detailed image of the subsurface seismic velocity at the Newberry EGS site down to 5 km. We collected continuous data for the 22 stations in the Newberry network, together with 12 additional stations from the nearby CC, UO and UW ...
Templeton, D. Lawrence Livermore National Laboratory
Oct 01, 2013
1 Resources
0 Stars
Publicly accessible
1 Resources
0 Stars
Publicly accessible
Utah FORGE: Phase 3 Ground Water Level Monitoring Data
Groundwater data around the Utah FORGE site has been collected to determine the piezometric levels and compositional variability. Field measurements in 2020 are designed to obtain and survey new groundwater wells that have been drilled on the distal periphery of the Utah FORGE pro...
Kirby, S. Utah Geological Survey
Sep 30, 2020
1 Resources
0 Stars
Publicly accessible
1 Resources
0 Stars
Publicly accessible
Water Use in Enhanced Geothermal Systems (EGS): Geology of U.S. Stimulation Projects, Water Costs, and Alternative Water Use Policies
According to the Energy Information Administration (EIA) of the U.S. Department of Energy (DOE), geothermal energy generation in the United States is projected to more than triple by 2040 (EIA 2013). This addition, which translates to more than 5 GW of generation capacity, is anti...
Harto, C. et al Argonne National Laboratory
Dec 16, 2014
13 Resources
1 Stars
Publicly accessible
13 Resources
1 Stars
Publicly accessible
Analysis of Existing Data from a Distributed Acoustic Sensing Experiment at Garner Valley, California
In September 2013, an experiment using Distributed Acoustic Sensing (DAS) was conducted at Garner Valley, a test site of the University of California Santa Barbara (Lancelle et al., 2014). This submission includes noise cross-correlation functions (NCF) . Each file includes a NCF ...
Zeng, X. University of Wisconsin
Mar 26, 2015
37 Resources
0 Stars
Publicly accessible
37 Resources
0 Stars
Publicly accessible
Utah FORGE 3-2418: Wellbore Fracture Imaging Using Inflow Detection 2024 Annual Workshop Presentation
This is a presentation on the Wellbore Fracture Imaging Using Inflow Detection by Stanford University and Sandia National Laboratory, presented by Roland Horde. This is a video presentation on wells, both before and after stimulation, using chloride or other ions to map fractures ...
Horne, R. and Schneider, M. Energy and Geoscience Institute at the University of Utah
Sep 13, 2024
1 Resources
0 Stars
Publicly accessible
1 Resources
0 Stars
Publicly accessible
Utah FORGE: Phase 3 InSAR Study Results
Ground movement is evaluated through analysis of Interferometric Synthetic Aperture Radar (InSAR) interferograms. Results indicate there has been no detectable ground movement at millimeter scale. The zipped file in this submission contains a report, maps, and results from the InS...
Feigl, K. and Batzli, S. Department of Geoscience University of Wisconsin-Madison
Sep 24, 2020
1 Resources
0 Stars
Publicly accessible
1 Resources
0 Stars
Publicly accessible
DEEPEN: Newberry Volcano MT and Gravity Data 2022 and 2023 Acquisition and Processing
As part of DEEPEN (DE-risking Exploration of geothermal Plays in magmatic ENvironments), a 3D play fairway analysis (PFA) was conducted at Newberry Volcano in Central Oregon for multiple play types (conventional hydrothermal, superhot EGS, and supercritical). For use in this PFA, ...
Schultz, A. et al Enthalpion Energy
Jun 30, 2023
8 Resources
0 Stars
Curated
8 Resources
0 Stars
Curated
Reservoir Stimulation Optimization with Operational Monitoring for Creation of EGS
EGS field projects have not sustained production at rates greater than half of what is needed for economic viability. The primary limitation that makes commercial EGS infeasible is our current inability to cost-effectively create high-permeability reservoirs from impermeable, igne...
A., C. Pacific Northwest National Laboratory
Sep 25, 2013
19 Resources
0 Stars
Publicly accessible
19 Resources
0 Stars
Publicly accessible
Utah FORGE: Phase 3 Magnetotelluric (MT) Data
New high-quality tensor MT data at 122 sites, including the vertical magnetic field and utilizing ultra-remote referencing, have been acquired over the Utah FORGE project area. The results will be used to delineate the densities of faults and fractures in crystalline basement rock...
Wannamaker, P. and Maris, V. Energy and Geoscience Institute at the University of Utah
Oct 01, 2020
5 Resources
0 Stars
Publicly accessible
5 Resources
0 Stars
Publicly accessible
Utah FORGE 3-2514: A Strain Sensing Array to Characterize Deformation at the FORGE Site Workshop Presentation
This is a presentation on the Strain Sensing Array to Characterize Deformation at the FORGE Site project by Clemson University, presented by Lawrence Murdoch. The project's objective was to evaluate the feasibility of measuring and interpreting tensor strain data to improve the pe...
Murdoch, L. et al Clemson University
Sep 08, 2023
1 Resources
0 Stars
Publicly accessible
1 Resources
0 Stars
Publicly accessible
Testing for Controlled Rapid Pressurization
Borehole W1 is a NQ core hole drilled at our test site in Socorro. The rock is rhyolite. Borehole W1 which was used to test gas-gas explosive mixtures is 55 feet deep with casing (pinkish in the drawing) set to 35 feet. The model is a representation of the borehole and the hol...
Knudsen, S. Sandia National Laboratories
Sep 03, 2014
1 Resources
0 Stars
Publicly accessible
1 Resources
0 Stars
Publicly accessible
Utah FORGE 3-2514: A Strain Sensing Array to Characterize Deformation at the FORGE Site 2025 Workshop Presentation
This is a presentation on the Strain Sensing Array to Characterize Deformation at the FORGE Site project by Clemson University, presented by Lawrence Murdoch. The project's objective was to evaluate the feasibility of measuring and interpreting tensor strain data to improve the pe...
Murdoch, L. Clemson University
Sep 18, 2025
3 Resources
0 Stars
Curated
3 Resources
0 Stars
Curated
Energy Return On Investment of Engineered Geothermal Systems Data
The project provides an updated Energy Return on Investment (EROI) for Enhanced Geothermal Systems (EGS). Results incorporate Argonne National Laboratory's Life Cycle Assessment and base case assumptions consistent with other projects in the Analysis subprogram.
EROI is a ratio o...
Mansure, C. Arthur Mansure
Jan 01, 2012
7 Resources
1 Stars
Publicly accessible
7 Resources
1 Stars
Publicly accessible
Improved Microseismicity Detection During Newberry EGS Stimulations
Effective enhanced geothermal systems (EGS) require optimal fracture networks for efficient heat transfer between hot rock and fluid. Microseismic mapping is a key tool used to infer the subsurface fracture geometry. Traditional earthquake detection and location techniques are oft...
Templeton, D. Lawrence Livermore National Laboratory
Oct 01, 2013
1 Resources
0 Stars
Publicly accessible
1 Resources
0 Stars
Publicly accessible
Utah FORGE: Drilling Data for Student Competition
Diagnostic drilling data (Pason log files) from Well 58-32 (previously labeled MU-ESW1), which was drilled near Milford Utah during Phase 2B of the FORGE Project to confirm geothermal reservoir characteristics met requirements for the final FORGE site. This dataset includes both ...
Podgorney, R. et al Idaho National Laboratory
Dec 07, 2018
2 Resources
0 Stars
Publicly accessible
2 Resources
0 Stars
Publicly accessible
Utah FORGE: Shut-In Wellhead Pressure Monitoring Data for Wells 58-32, 16A(78)-32, and 16B(78)-32
This dataset contains shut-in wellhead pressure monitoring data collected at the Utah FORGE site for wells 58-32, 16A(78)-32, and 16B(78)-32. The data are provided in an Excel spreadsheet and include time-stamped pressure measurements recorded during shut-in periods. Pressure valu...
McLennan, J. Energy and Geoscience Institute at the University of Utah
Dec 03, 2025
1 Resources
0 Stars
Curated
1 Resources
0 Stars
Curated
Fallon FORGE: Well Log Database
Master well database for all logs and other well data pertaining to the Fallon FORGE site.
Tables are formatted in NGDS Teir 3 schema where appropriate; redundancies between tables are omitted, and should be queried off of the main WellHeader table.
All relationships are set on th...
Blankenship, D. Sandia National Laboratories
Jul 03, 2018
2 Resources
0 Stars
Publicly accessible
2 Resources
0 Stars
Publicly accessible
Utah FORGE: Groundwater Data
This submission includes two modeled drawdown scenarios with new supply well locations, a total dissolved solids (TDS) concentration grid (raster dataset representing the spatial distribution of TDS), and an excel spreadsheet containing well data.
Moore, J. Energy and Geoscience Institute at the University of Utah
Jul 20, 2016
5 Resources
0 Stars
Publicly accessible
5 Resources
0 Stars
Publicly accessible
West Flank Coso FORGE: 3D Temperature Model
x,y,z data of the 3D temperature model for the West Flank Coso FORGE site. Model grid spacing is 250m.
The temperature model for the Coso geothermal field used over 100 geothermal production sized wells and intermediate-depth temperature holes. At the near surface of this model,...
Blankenship, D. Sandia National Laboratories
Mar 01, 2016
1 Resources
0 Stars
Publicly accessible
1 Resources
0 Stars
Publicly accessible
Utah FORGE 3-2418: Wellbore Fracture Imaging Using Inflow Detection Measurements Workshop Presentation
This is a presentation on the Wellbore Fracture Imaging Using Inflow Detection Measurements project by Stanford University, presented by Dr. Roland N. Horne. The project's objective was to make measurements in the Utah FORGE wells, both before and after fracturing experiments, to...
Horne, R. and Su, J. Stanford University
Sep 08, 2023
1 Resources
0 Stars
Publicly accessible
1 Resources
0 Stars
Publicly accessible
Utah FORGE: Area 0.5 m LiDAR Data
During the Fall of 2016 AGRC and the Utah Geological Survey acquired ~205 square miles of 8 points per meter Quality Level 1 LiDAR of The Frontier Observatory for Research in Geothermal Energy (FORGE) area around Milford, Utah in Beaver and Millard Counties in western Utah. The 0....
Allis, R. Energy and Geoscience Institute at the University of Utah
Oct 01, 2016
1 Resources
0 Stars
Publicly accessible
1 Resources
0 Stars
Publicly accessible