Search GDR Data
Showing results 1 - 25 of 51.
Show
results per page.
Order by:
Available Now:
Topic
Technologies
Demonstration Sites
Data Type
The submitted dataset was generated by a series of laboratory fracture clogging (permeability reduction) experiments using commercially available materials used for lost circulation management during geothermal well drilling. The experiments were conducted using a permeability plu...
This submission contains photographs of rock core collected from EGS Collab Experiment 2 (and 3) boreholes. Cores were generally photographed in about 1-foot sections using Nikon D3300 DSLR cameras from two angles about 90 degrees apart, wet and dry. Core photos are provided here ...
The steel pipe experiment conducted in the lab was using 6 meter low-carbon steel pipe. We tested it with both dry and in-water condition. In the dry experimental setup, a coaxial cable acting as a return path in the air.
The coaxial-cable experiment conducted in the lab was with 80 m coaxial cable( RG-85). This experiment compares the TDR response between damaged and undamaged cable. For the damaged cable, the damaged section is in the middle (40 m). The amplitude of the data is mV with time (us).
This test was conducted at the Chevron Cymric oilfield in the California central valley near Bakersfield. A reflected seismic signal was observed in all three components (x, y, z) of the 3-component Episensor geophone, as well as all phones on the single component array. The arriv...
Cymric oil field frequency domain electromagnetic (FEM) data with two parts of data labeled Part 1 and Part 2. Part 1 utilizes an electrical source line parallel to the receiver line, while Part 2 utilizes an electrical source line at a 75 deg angle to the receiver line. Data are ...
For the model calculation we applied EM3D using completion diagram of CaMI site and a background resistivity consistent with the borehole logs. It was also important to use the accurate position of the return electrode. We note that for the data fit the code also incorporated we...
The objective of this field test is to validate several technologies for non-invasive well integrity assessment using existing wells with a known completion. The tests were made at the Cymric oil field, which is a steam flood operation. The wells therefore undergo similar downhole...
A presentation with notes showing an overview of the last 6 months of the project on high-temperature self-healing inorganic cement composites. General approach, test methods and results for the self-healing cement composites are presented. Data include strength recoveries for 9 c...
This folder contains the GEOPHIRES codes and input files for running the base case scenarios for the six deep direct-use (DDU) projects. The six DDU projects took place during 2017-2020 and were funded by the U.S. Department of Energy Geothermal Technologies Office. They investiga...
This paper describes the methodology used to define the baseline exploration suite of techniques (baseline), as well as the approach that was used to create the cost and time data set that populates the baseline. The resulting product, an online tool for measuring impact, and the ...
A table of cement formulations tested by Brookhaven National Laboratory in 2016-2017 in the frame of the "Self-healing and Re-Adhering Cements with Improved Toughness at Casing and Formation Interfaces for Geothermal Wells" project.
This experiment is testing the tube waves reflected from the bottom of the well. We put six single-channel geophones on the surface and a 24-channel downhole hydrophone into the well. The well is about 30 meters deep. Just a steel casing in the sand formation, no cement.
NREL and the Colorado School of Mines (SURGE) conducted research in FY14 to identify petroleum drilling and completion practices (methods and technologies) that can be transferred to geothermal drilling and completion, to provide the geothermal industry with more effective, lower ...
The data include compressive strength and Young's Modulus recoveries in steam and carbonate environments at 270 deg C for four chemically different cement composites after imposed controlled damaged.
This report describes a comprehensive review of 49 existing supercritical geothermal wells to inform future geothermal drilling attempts and avoid previous failure points and understand material and testing limitations, while collating information gathered in a publicly accessible...
This is an electronic database detailing different types of, various phases of, best practices for, and cost and time associated with geothermal exploration techniques. The groups of exploration techniques included in the database are Data and Modeling Techniques, Downhole Techniq...
Diagnostic drilling data (Pason log files) from Well 58-32 (previously labeled MU-ESW1), which was drilled near Milford Utah during Phase 2B of the FORGE Project to confirm geothermal reservoir characteristics met requirements for the final FORGE site. This dataset includes both ...
The data set shows performance of economical calcium phosphate cement (Fondu) blended with fly ash, class F (FAF) in carbon steel corrosion protection tests (corrosion rate, corrosion current and potential), bond and matrix strength, as well as matrix strength recovery after impos...
This dataset compiles information on geothermal wells drilled into supercritical and near-supercritical conditions, with a focus on drilling and completion materials, fluid chemistry, and laboratory validation studies. The data are drawn from well reports, scientific literature, a...
Well data for the INEL-1 well located in eastern Snake River Plain, Idaho. This data collection includes caliper logs, lithology reports, borehole logs, temperature at depth data, neutron density and gamma data, full color logs, fracture analysis, photos, and rock strength paramet...
A fundamental issue in microhole drilling is that delivering high weight-on-bit (WOB), high torque rotational horsepower to a conventional drill bit does not scale down to the hole sizes necessary to realize the envisioned cost savings An optimization algorithm called a golden sec...
Thermal conductivity (TC) data taken for different wells at a specified drill depth. This is an abridged version of the complete SMU heat flow database, downloaded from the SMU node of the NGDS at the beginning of INGENIOUS (approximately April 2021), and filtered to the INGENIOUS...
The objectives of this project were to (1) perform a literature review of sedimentary geothermal resources, (2) identify data sources and develop data-collection methodologies that characterize selected resources, (3) screen sedimentary basins and formations for sedimentary geothe...
The data files below summarize the results from various experiments testing properties of high-temperature self-healing inorganic cement composites. These properties include cement-carbon steel bond strength, Young's modulus recovery, matrix recovery strength, and compressive stre...
Google Map